Overview
The Pro Comp 91-5546B is a frame-side front track bar bracket for the 2007-2010 Toyota Tundra. It mounts the front track bar lower at the frame, so the bar keeps its factory operating angle. The bracket is 3/16 inch thick steel, MIG welded, and comes with grade 8 installation hardware. The position is front, with part code EXP91-5546B.
It is designed to be used with an adjustable front track bar and drop pitman arm, which together give correct steering geometry, more front suspension travel and no bump steer. It fits the Base, Limited and SR5 trims of the 2007-2010 Tundra.
Key features
- Frame-side mounting for the front track bar
- 3/16 inch thick steel
- MIG welded construction
- Grade 8 installation hardware
- Keeps the factory track bar operating angle
- Recommended with an adjustable front track bar and drop pitman arm
Frame bracket and track bar fit
A frame-side bracket relocates the front track bar’s lower mount, which helps keep the bar near its factory working angle when the suspension is raised or changed. Its steel plate and welds carry lateral loads from the axle, so the bracket mounting area should be inspected regularly. Fit depends on the trim and year, so confirm both before buying.
Installing this type of bracket generally involves the track bar length and the drop pitman arm, which need to be set together. Check steering centering, bump steer and clearance at full lock after the install. Inspect the bracket bolts and welds during routine service, especially after rough trail use.
- Set bar length together with the pitman arm
- Confirm clearance to the frame at full lock
- Re-torque bracket bolts during service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-5546B |
| Listed part code | EXP91-5546B |
| UPC | 614901130300 |
| Position | Front |
| Type | Frame side |
| Material | 3/16 inch thick steel |
| Hardware | Grade 8 installation hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007-2010 Toyota Tundra in the Base, Limited and SR5 trims.
The Platinum trim and the Tundra years outside 2007-2010 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting the track bar lower at the frame changes the bar angle, so the adjustable track bar length and the drop pitman arm should be set together. Check the steering centering and the bump steer after the install.
What’s included
The bracket comes with its grade 8 installation hardware. The adjustable track bar and drop pitman arm are needed with it and are not included.





