Select your vehicle

Pro Comp 3 Inch Lift Kit with ES3000 Shocks – K2058B

Pro Comp Suspension

Shop Dodge Ram 3500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3-inch front lift with coil spacers, sway bar spacers and four link arms
  • ES3000 front and rear shocks
  • Fits 2003-2008 Dodge Ram 2500 and 3500 trucks
  • Part number K2058B

Description

Overview

The Pro Comp 3 Inch Lift Kit with ES3000 Shocks, part number K2058B, is a 3-inch front lift for the 2003-2008 Dodge Ram 2500 and 3500. The steering correction is a pitman arm change, so this kit is not a plain spacer install.

The front components are metal coil spring spacers, front sway bar spacers, bump stops, and brake line extension brackets. The kit also includes four link arms. No rear lift is listed.

Key features

  • 3-inch lift height
  • Metal coil spring spacers at the front
  • Front sway bar spacers
  • Bump stops and brake line extension brackets
  • Four link arms
  • Steering correction through a pitman arm
  • Direct fit for the 2003-2008 Dodge Ram 2500 and 3500

Before you install a front lift

A front lift raises the axle and changes the angles of the steering and driveline parts. Coil spacers add height without changing how the springs are rated, while the link arms and pitman arm control axle position and steering geometry. Because these parts work together, treat the lift as a system rather than a single component. Check brake hose length and driveshaft angle once the truck is raised.

Worn ball joints, tie rod ends and bushings are often replaced alongside a lift, since the new angles place more load on them. Watch for uneven tire wear, a wandering steering wheel or clunking over bumps as signs the older parts need attention. After the first few trail runs, recheck fasteners and sway bar links for looseness.

  • Inspect ball joints and tie rod ends before installation
  • Re-torque fasteners after the first few drives
  • Plan a full alignment after the steering correction
  • Measure brake hose length at the new height

Specifications

Brand Pro Comp Suspension
Part number K2058B
UPC 614901204858
Lift height 3 inches
Lift height range 3 to 4.99 inches
Front lift Metal coil spring spacers, sway bar spacers and bump stops
Steering correction Pitman arm
Rear lift None
Shocks ES3000, front and rear
Fitment Direct fit

Vehicle fitment

The kit fits the 2003-2008 Dodge Ram 2500 and the 2003-2008 Dodge Ram 3500 across their trim levels.

Ram 1500 trucks and other Ram 2500 and 3500 years are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The pitman arm steering correction and the four link arms change steering and axle geometry, so have the steering and alignment checked after installation.

What’s included

The kit includes metal coil spring spacers, front sway bar spacers, bump stops, a pitman arm steering correction, four link arms, brake line extension brackets, and ES3000 shocks.

SKU: EXPK2058B Category:

Specification

Shipping weight 76.75 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 25002003–2008Laramie, SLT, ST, SXT, Sport, TRX4
Dodge Ram 35002003–2008Laramie, SLT, ST, SXT, Sport, TRX4

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the K2058B fit a 2005 Dodge Ram 3500?

Yes. The K2058B fits the 2003-2008 Dodge Ram 3500, and a 2005 model falls within that range. Confirm fit for your vehicle's year, model and trim before ordering.

Does the K2058B need a steering correction?

Yes. The steering correction is a pitman arm change, so the kit is not a spacer-only install. The pitman arm is the only steering change included with this kit.

Does this kit lift the rear of the truck?

No. The rear is not lifted by this kit, so the rear height stays the same as stock. Only the front receives the 3-inch lift, through the coil spacers and sway bar spacers, along with the bump stops.

Should I replace the steering parts when installing this lift?

Often, yes. Worn ball joints and tie rod ends carry more load once the axle sits higher, so inspect them before installation. Replacing worn parts at the same time helps the new geometry hold its alignment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 3500 Lift Kits on Amazon