Overview
The Pro Comp 52482B is a spring hanger kit for trucks that keep their factory springs. The kit adds lift while reusing the stock springs, using spring hangers and shackles. It is a direct fit kit with a 2-inch stage 1 lift.
The kit is a front spring hanger kit and includes ES9000 shock absorbers at the front and rear.
Key features
- 2-inch stage 1 lift
- Reuses the factory springs
- Spring hangers and shackles included
- ES9000 shocks at the front and rear
Checking springs and shackles
A spring hanger kit depends on the condition of the factory springs. Before installing, look for cracked or sagging leaves, rust that has eaten into the spring perch, and worn bushings in the eyes. Shackles carry load differently than a stock setup, so check their pins and bushings for play. Replace any worn parts before the new hangers are fitted.
Hangers and shackles are often replaced along with the bushings and mounting hardware during this kind of job. Check the axle wrap and brake line routing after the truck is raised, since the new height changes how these components sit. Shock absorbers should be checked for leaks and worn mounts. Keep a record of torque settings so the job can be inspected later, and set the alignment once the work is complete.
Specifications
| Brand | Pro Comp |
|---|---|
| Part number | 52482B |
| UPC | 614901120721 |
| Type | Spring hanger kit |
| Lift | 2 inches, stage 1 |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Fitment | Direct fit |
Vehicle fitment
Verify that your year, model and trim fit this kit’s application before you place an order.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit reuses the factory springs, the spring hangers and shackles are what set the new ride height. Check that the springs and shackles are in good condition before installation.
What’s included
Spring hangers, shackles and ES9000 shock absorbers.









