Overview
The Pro Comp ES2000 single steering stabilizer bracket, part number 2566, is a mount for installing an ES2000 steering stabilizer shock on 1980–1996 Ford F-150 and Ford Bronco vehicles. The bracket kit is a mount only, so the stabilizer shock is a separate item.
It is a single cylinder bracket that includes the bracket and mounting hardware. The shock boot is not included.
Key features
- Single cylinder bracket
- Includes mounting hardware
- Mount only, without the stabilizer shock
- It is a direct fit for the 1980–1996 Ford F-150 and Bronco.
Before you install
A steering stabilizer damps side-to-side movement of the front axle and works alongside the tie rods and drag link. Because the bracket carries the shock’s load every time the steering wheel turns, its mounting points should be solid and free of rust before you start.
Because a mount-only kit leaves the shock to you, match the stabilizer’s mounting hardware to the bracket before buying. Inspect the other steering parts at the same time. Worn tie rod ends, loose drag link joints and cracked bushings make a stabilizer work harder and wear out faster, and replacing them while the front end is apart is usually easier.
After installation, drive a short distance at low speed and listen for knocks or clunks near the bracket. Any movement at the mounting points should be fixed before normal driving resumes.
- Check the frame and steering box mounts for cracks
- Inspect tie rod ends and drag link joints for play
- Re-check bolts after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 2566 |
| Type | Mount only |
| Cylinder | Single |
| Brackets included | Yes |
| Shock boot | Not included |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for the 1980–1996 Ford Bronco and the 1980–1996 Ford F-150.
The list stops at 1996, so 1997 and later F-150 models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket attaches the ES2000 stabilizer shock to the vehicle, and the kit includes the bracket and mounting hardware. Check the hardware against your ES2000 stabilizer before installing.
What’s included
One single steering stabilizer bracket with mounting hardware.
Not included: the ES2000 steering stabilizer shock, which the bracket is designed to mount.








