Overview
The Pro Comp EXP223200B is a single PRO-X twin tube steering stabilizer for the 2000–2010 Dodge Ram 2500 and the 2000–2010 Dodge Ram 3500. It has a 23.3-inch extended length and a 9.21-inch travel length, with loop mounts at both ends.
Damping in the steering linkage helps control wheel vibration and bump steer. This twin tube unit is intended for everyday road use and for rough roads with oversized tires.
It uses a 1-3/8 inch nylon banded piston and a black powder coat finish. The unit is intended for oversized tires and rough roads.
Key features
- PRO-X twin tube design with damping for everyday and rough-road use
- Extended length 23.3 inches and travel length 9.21 inches
- Loop upper and lower mounts
- 5/8 inch chrome hardened shaft with a 1-3/8 inch nylon banded piston
- Black powder coat finish
Choosing a stabilizer length
Length matters more than most shoppers expect. The extended and collapsed lengths decide how far the stabilizer can travel between the axle and the linkage, so the install points need to allow for full steering lock and suspension movement. A lift or a change in tire size can shift those points, so measure again after any suspension change.
Loop mounts at both ends are common on Ram trucks, but the brackets are separate. Choose brackets that hold the eye at the right angle and clear the frame. Pair the stabilizer with sound steering components, since worn ball joints and a loose drag link can make even a correct length feel wrong.
- Measure install points at full lock
- Account for ride height after a lift
- Choose brackets that clear the frame
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP223200B |
| Series | PRO-X hydraulic steering stabilizer |
| Type | Stabilizer only, single |
| Extended length | 23.3 inches |
| Collapsed length | 14.09 inches |
| Travel length | 9.21 inches |
| Body diameter | 2.18 inches |
| Upper mount | Loop |
| Lower mount | Loop |
| Piston | 1-3/8 inch nylon banded |
| Shaft | 5/8 inch chrome hardened |
| Finish | Black powder coat |
| Brackets included | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2010 Dodge Ram 2500 in the Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX and TRX4 trims, and the 2000–2010 Dodge Ram 3500 in the Base, Laramie, SLT, ST, SXT, Sport and TRX4 trims.
Ram trucks from 1999 and earlier and from 2011 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need brackets that fit the axle and the steering linkage, and those brackets are not included. Check the stabilizer’s collapsed and extended lengths against the install points before fitting.
What’s included
The stabilizer is sold individually, with no brackets included.
Not included: brackets and the optional shock boot, which is sold separately.









