Overview
The Pro Comp ES9000 Series rear shock absorber, part number 932005, is designed for a 0 to 3 inch lift and is supplied without a boot.
Rear shocks and lift range
A rear shock controls how the axle moves over bumps and under braking, and it works with the rear springs to set the ride. Shocks made for a lift range need to match the height and spring rate of the vehicle so the damping does not feel too firm or too loose. If the lift is changed later, check the shock’s length and mount style again.
Because this shock is sold without a boot, it is worth planning for protection on the shaft. A dust boot keeps grit and water from reaching the seal, which matters on dusty or wet trails. Inspect the shaft and seal after each trip, and look for oil on the body or uneven wear on the bushings.
- Match the shock to the rear lift range
- Plan for a dust boot if your use is dusty
- Inspect seals and bushings after each trip
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 932005 |
| UPC | 614901236729 |
| Shock series | ES9000 |
| Position | Rear |
| Lift range | 0 to 3 in |
| Boot | Not included |
Vehicle fitment
Fit is not confirmed for the 932005, so no vehicle is named here. Confirm the rear position and 0 to 3 inch lift range against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Series shock absorber.
Not included: dust boot.























