Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 915509

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES9000 Series front shock, part number 915509
  • Extended length 15.5 in, collapsed length 10.17 in (per description)
  • Factory upper and lower mounts
  • Twin tube with 10 stage velocity sensitive valving

Description

Overview

The Pro Comp 915509 is a front ES9000 Series twin tube shock absorber. It has an extended length of 15.5 inches and a collapsed length of 10.17 inches, and it uses factory upper and lower mounts. It is intended for a 0 inch lift or drop.

The 10 stage velocity sensitive valving gives a smooth, comfortable high ride and enhances off-road handling. The piston head is a 1 3/8 inch nylon banded full displacement design, and the shock mounts are double welded for strength.

The shock is not adjustable, has no remote reservoir and is sold as each. No travel figure is given, so the travel should be checked against the factory unit it replaces.

Key features

  • Front position
  • Twin tube design
  • 10 stage velocity sensitive valving
  • 1 3/8 inch nylon banded full displacement piston head
  • Double welded shock mounts

Front shock length and ride height

Front shock length affects ride height and how the suspension moves through its range. A shock that is too long or too short can change how the front end sits, and it may contact the bump stops sooner than intended. Matching the installed length is the first step in any front shock replacement.

Front shocks also work with the steering geometry, so a like-for-like replacement at the same length usually keeps alignment unchanged. Any change in mounts or height can alter it, so have the front end checked after installation if the old shock was bent or worn.

  • Measure the installed length before removing the old shock
  • Check bump stops and dust boots for wear
  • Look for cracked bushings at the mounts

Specifications

Brand Pro Comp Suspension
Part number 915509
UPC 614901070392
Shock series ES9000 Series
Position Front
Lift height 0 in. lift or drop
Extended length 15.5 in (per description)
Collapsed length 10.17 in (per description)
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Check that the factory mounts and 15.5 inch extended length match the front suspension you are replacing.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES9000 Series front shock absorber, sold as each.

SKU: EXP915509 Category:

Specification

Shipping weight 4.81 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

How long is the 915509?

It has a 15.5 inch extended length and a 10.17 inch collapsed length. Measure the old front shock and confirm these lengths and the factory mounts before ordering.

Is the 915509 a front shock?

Yes. It is intended for the front position at a 0 inch lift or drop, with factory upper and lower mounts.

Does the 915509 have factory mounts?

Yes. It uses factory upper and lower mounts and has no remote reservoir. It is not adjustable and is sold as each.

Will a new front shock change my alignment?

Usually not when the new shock matches the old length and mounts. Any change in height or mounting points can affect alignment, so have the front end checked after installing a new shock.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon