Overview
The Skyjacker Softride Hydro Shock Absorber H7060 is a rear hydraulic twin tube shock in the H7000 series. Confirm the lift range your suspension needs before ordering.
The shock uses multi-stage velocity sensitive valving, variable hydraulic resistance and an internal rebound bumper. Its 5/8 inch hardened double chrome rod, polyurethane bushings and red boot complete the set. Its fit covers trucks and SUVs from 1966 to 2018, with Ford, Chevrolet, GMC, Mazda and Toyota models.
Key features
- Multi-stage velocity sensitive valving
- Hydraulic action with variable resistance
- Heavy-duty twin tube construction
- 5/8 inch diameter hardened double chrome rod
- Internal rebound bumper and oversize piston head
- Red polyurethane bushings and red boot
- Limited lifetime warranty stated by the manufacturer
Rear shock fitment checks
Rear shocks carry much of the load on trucks and SUVs, especially when the rear end is loaded or towing. Their mounting points and bushings take the most stress when the axle moves up and down, so mounts should be checked along with the shock body.
Before installing a rear hydraulic shock, confirm the mounting position and the model year range that fits your vehicle. Models from different decades often use different mounting hardware, so a shock that looks similar may not thread into the same bracket. Check the bump stops and the boot as part of the same job.
- Check the upper and lower bushings for cracks
- Look for oil on the body or around the seal
- Confirm the bump stop is seated and undamaged
- Inspect the boot for tears after trail use
Specifications
| Brand | Skyjacker |
|---|---|
| Series | H7000, Hydro Series |
| Part number | H7060 |
| UPC | 803696140229 |
| Position | Rear |
| Lift range (as written) | 10 – 9 in |
| Damping | Hydraulic |
| Piston rod | 5/8 inch diameter, hardened double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Colors | 15 other colors available |
| Warranty | Limited lifetime |
Vehicle fitment
It fits Chevrolet Blazer, K10, K20, K30 and K5 Blazer trucks, Ford Bronco, Bronco II, Excursion, F-100, F-150, F-250, F-350 and Ranger models, GMC Jimmy, K15, K25, K1500, K2500 and V-series trucks, Mazda B-series pickups, and Toyota Land Cruiser, Pickup and T100 models across the years covered.
The list does not include 1997–2003 F-150 trucks or any Jeep or Dodge model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift range is written as 10 – 9 in, confirm the intended range before installation. Support the vehicle on jack stands while working on the rear suspension, and check the mounting points against your installed lift.
What’s included
One rear shock absorber with red polyurethane bushings and a red boot.
Not included: Confirm fit for your vehicle’s year, model and trim before ordering, especially for 1997–2003 F-150, Jeep or Dodge applications.









