Overview
The Pro Comp 929592 is a front ES9000 shock rated for a 6 inch lift. It is a twin tube, nitrogen gas charged shock with 10-stage velocity sensitive valving and factory mounts at both ends.
It is a front shock for a 6 inch lift, and it fits the 2006 to 2008 Dodge Ram 1500 (Laramie, SLT and SXT), the 2003 to 2010 Ram 2500 and 3500, and the 2011 to 2012 Ram 2500 and 3500 in the trims shown below.
Key features
- Front position for a 6 inch lift
- Twin tube with 10-stage valving
- Nitrogen gas charged
- Nylon banded piston head and double welded mounts
Front shocks and lift height
On a lifted front end, the front shock controls the axle movement that the new height creates. The shock must extend and compress through a longer range, so its length and travel should suit the lift rather than the stock setup. A front shock that is too short can strain the mounts and limit steering movement.
Front shock wear shows up as wandering on the highway, uneven tire wear, or a front end that dives under braking. Because a front shock affects steering feel, replace it in pairs so both sides react the same way. After installation, check steering, brake hoses and front alignment, since a lifted front changes those angles.
- Replace front shocks in pairs
- Check brake hose length after lifting
- Inspect upper mounts for cracking
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929592 |
| UPC | 614901128741 |
| Series | ES9000 |
| Position | Front |
| Lift | 6 inches |
| Extended length | 29.83 inches |
| Collapsed length | 17.32 inches |
| Travel | 12.51 inches |
| Mounts | Factory upper and lower |
The 929592 is a front shock, and its 6 inch lift rating means it is matched to trucks that carry a 6 inch front lift. The 29.83 inch extended length and 17.32 inch collapsed length must suit the front geometry of the truck, so the lift height should be confirmed before the shock is ordered. Factory upper and lower mounts keep the fit close to the original front shock.
Pro Comp uses the same 10-stage velocity sensitive valving across the ES9000 family, and this front version is designed to control the front end over rough terrain while keeping highway ride comfortable.
Vehicle fitment
The covered ranges are the 2006 to 2008 Dodge Ram 1500 (Laramie, SLT, SXT), the 2003 to 2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT, Sport, TRX, TRX4) and 3500 (Laramie, SLT, ST, SXT, Sport, TRX4), and the 2011 to 2012 Ram 2500 and 3500 (Laramie, Laramie Longhorn, SLT, ST).
Ram 1500 model years from 2003 to 2005 and from 2009 onward are not on the list, and the 2013 and later Ram trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front shock.






