Overview
The Pro Comp EXP63162K, also written 63162K, is a 3-inch front leveling kit with strut spacers for the 2015–2022 Chevrolet Colorado and GMC Canyon. It is a direct fit, with lift blocks and U-bolts at the rear where applicable.
The front lift height is 3 inches, and the front can be raised from 1.5 to 2.5 inches depending on the application. Confirm the height your truck needs before ordering.
Pro Comp describes its level lift kits as a quick, lower-cost way to balance the front with the rear. The kit is intended to give the truck an improved, level stance.
Key features
- 3-inch front lift with strut spacers
- Rear lift blocks and U-bolts, where applicable
- Description gives a front lift range of 1.5 to 2.5 inches, depending on the application
- Direct fit to the listed Colorado and Canyon years
- Black finish with steel spacer material
Things to check
A front leveling kit on a Colorado or Canyon mostly corrects the nose-low stance that comes with a rear-heavy load or a worn factory spring. Strut spacers raise the front without changing the upper strut mount geometry, but the new ride height still affects the alignment, the headlight aim and the clearance between the tire and the fender liner.
Many owners pair a leveling kit with a shock upgrade, because the longer travel and altered angles put more load on the factory shocks. The track bar and its drop bracket are often considered at the same time, since a raised front can shift the axle’s lateral position. Inspect the spacer bolts, the rear U-bolts and the brake lines after the first drive, and look for rubbing at full steering lock.
Before the work starts, lay out the spacers, bolts and U-bolts and check them against the old parts. Set the rear first, then the front, and tighten all fasteners only after the truck is back at ride height so the spacers seat without preload.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP63162K (63162K) |
| Kit type | Leveling lift kit |
| Front lift height | 3 inches |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts, where applicable |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Bump stops | None |
| Spacer material | Steel |
| Finish color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2022 Chevrolet Colorado in the Base, LT, WT, Z71 and ZR2 trims, and the 2015–2022 GMC Canyon in the AT4, All Terrain, Base, Denali, Elevation, Elevation Standard, SL, SLE and SLT trims.
Colorado and Canyon models from 2014 and earlier, and from 2023 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strut spacers change the front ride height, so the alignment should be checked after the install. Rear lift blocks are listed where applicable and need U-bolts torqued after the lift is set.
What’s included
Strut spacers at the front in black steel are included. The track bar drop and bump stops are not included.
Not included: the track bar drop and bump stops.




















