Overview
The Pro Comp 57085B is a set of hydraulic rear bump stops for the 2007–2018 Toyota Tundra in several trims. The rear bump stops are hydraulic, and they limit how far the rear suspension compresses.
Bump stops limit how far the suspension can compress and help protect the suspension at full travel. This part is a hydraulic rear bump stop.
Key features
- Hydraulic rear bump stop design
- Fits the 2007–2018 Tundra
- Pro Comp part number 57085B
Bump stops and suspension travel
A bump stop limits how far the axle or spring can compress before the metal parts meet. On a rear suspension, it cushions the truck at the end of travel and reduces the risk of damage to the spring, shock and frame. Hydraulic units use fluid resistance to control how quickly the stop compresses, which gives a more controlled end of travel than a solid rubber stop.
Bump stops are often replaced with the shocks or springs, since wear in one part changes how the others behave. Inspect them at each service for cracks, leaks and loose mounts. Keep the old unit until the new one is installed so you can compare their mounting points and clearances. If the truck bottoms out on rough trails, the bump stops may be the first place to look.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57085B |
| Position | Rear |
| Type | Hydraulic bump stop |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra model years from 2019 onward and other Toyota trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the mounting location on your rear axle or frame before installation. Confirm the bump stop clears the spring and the shock at full compression.
What’s included
The hydraulic rear bump stop, identified by part number.
Not included: mounting hardware, if your vehicle needs it.








