Overview
The Prothane Motion Control Axle Snubber, part number 1-1301, is a urethane bump stop for the suspension. Prothane says polyurethane is designed to last and does not rot or deteriorate from oils, road salt, chemicals or atmospheric contaminants such as ozone or smog.
It is a urethane bump stop designed for universal fit. Measure your axle and suspension travel before installing it.
Key features
- Urethane bump stop type
- Polyurethane is designed to resist rot and deterioration from oils, road salt and chemicals.
- It is designed to resist ozone and smog.
- It is a universal fit part.
- Listed in the Bump Stops category
Bump stops and suspension travel
A bump stop works as the last point of travel before the suspension bottoms out, so it protects the axle, shocks and mounts from hard impacts. Urethane is a common material for these parts because it stands up to repeated compression and exposure to road grime. The stop’s height and position decide when it starts to work, so placement and clearance with nearby parts matter as much as the material.
Bump stops are often inspected alongside shocks, springs and control arm bushings, since worn suspension parts can change how much travel is available. A stop that sits too low may never engage, while one that is too high can contact the axle housing or brake lines early. Check after installation by cycling the suspension slowly to confirm clearance through its full range.
- Inspect for cracks, flattening or tears
- Check that brake lines and wiring have clearance
- Recheck fasteners after the first drives
- Replace stops with worn or missing sections
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1301 |
| UPC | 636169003141 |
| Product type | Axle snubber, bump stop |
| Material | Urethane |
| Type | Urethane bump |
| Fitment listing | Universal fit |
| Category | Suspension accessories, bump stops |
Vehicle fitment
This axle snubber is a universal fit for suspension setups, so confirm it suits your axle and vehicle before buying.
Confirm the snubber dimensions and suspension travel against your axle and vehicle before purchasing.
Installation notes
A snubber limits axle travel, so correct placement matters. Follow the installation instructions, confirm that suspension travel and clearance are correct, and have the work done by a professional if you are unsure. Re-check the fasteners after the first miles of driving.








