Overview
The Pro Comp ES9000 Series shock absorber, part number 932002, is a twin tube, gas charged shock from Pro Comp Suspension. It has a 32.83 inch extended length and an 18.82 inch collapsed length.
Twin tube design and 10 stage velocity sensitive valving are meant to deliver a smooth, comfortable high ride while enhancing off road handling and performance. A 1 3/8 inch nylon banded full displacement piston head and double welded shock mounts are built for strength and long lasting durability.
Key features
- Twin tube design with 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
- Gas charged, not adjustable, with no remote reservoir
Choosing a replacement shock
A shock absorber controls how quickly the spring compresses and rebounds, so a replacement should match the length and travel of the unit it replaces. Gas charged twin tube shocks like this one keep the working oil in a body separate from the reserve, which helps damping stay steady during repeated bumps. Valving sets how firmly the shock resists movement at different speeds, so the valve stack matters as much as overall size when you judge ride quality.
Mounts deserve the same attention. Worn bushings or cracked mounts can change geometry and cause clunking even when the shock itself is sound, so inspect them whenever the shock comes out. Replacing shocks in pairs on the same axle keeps damping balanced from side to side. If a bump leaves the vehicle bouncing for several cycles or the body shows oil streaks, the old unit is likely worn and due for replacement.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 932002 |
| UPC | 614901696615 |
| Shock series | ES9000 |
| Extended length | 32.83 in |
| Collapsed length | 18.82 in |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Piston head | 1 3/8 in nylon banded, full displacement |
| Valving | 10 stage velocity sensitive, twin tube |
| Charge | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot | Not included |
Vehicle fitment
Compare the 32.83 in extended and 18.82 in collapsed lengths with the shock you are replacing, and make sure the mounts match before ordering. Confirm your vehicle’s year, model and trim before ordering.
Compare these measurements with the shock you are replacing before ordering, and confirm the mounts match. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, finished in white.
Not included: dust boot.











