Overview
The Fox Racing Shox 985-24-115 is a smooth body reservoir shock in the Fox 2.0 Performance Series. It has an extended length of 24.80 in., a collapsed length of 15.20 in. and a 9.60 in. stroke. No vehicle is named for this part, so its application is unconfirmed.
The aluminum body is metal-impacted, which dissipates heat faster than steel. The Internal Floating Piston keeps oil and nitrogen gas apart, supporting predictable ride quality on very rough roads.
Key features
- Metal-impacted aluminum shock body
- Smooth body reservoir configuration
- Internal Floating Piston (IFP) separating shock oil from the gas
- High-pressure nitrogen gas chamber
- Bolt-on package with direct-fit mounting.
Shock stroke and length
Stroke is the piston’s travel inside the body, and it works together with the collapsed and extended lengths to define the usable range. A longer stroke allows more articulation before the shock reaches its limits, while a shorter one can bottom out sooner on rough ground. Stroke is only one figure, so compare the whole set of measurements together.
Gas-charged reservoir designs keep their damping consistent when the nitrogen chamber is sealed and the floating piston moves freely. Before fitting any replacement, check the old unit for seal leaks and compare its lengths against the new one, so the suspension returns to its intended height.
- Compare collapsed length at each mount
- Confirm stroke against the travel you need
- Check seals for oil seepage
- Keep the gas side handled with care
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-115 |
| UPC | 700007190415 |
| Series | Fox 2.0 Performance Series |
| Body style | Smooth body reservoir |
| Shock body material | Metal-impacted aluminum |
| Extended length | 24.80 in. |
| Collapsed length | 15.20 in. |
| Stroke | 9.60 in. |
Vehicle fitment
Vehicle fitment is unknown for part number 985-24-115. Direct Fit is the only fitment term, and no year, model or trim is identified, so compatibility is unconfirmed.
Compare the 24.80 in. extended and 15.20 in. collapsed lengths with the shock you plan to replace. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the shock being removed and compare its lengths with 24.80 in. extended and 15.20 in. collapsed before installing. The nitrogen gas chamber is under high pressure, so handle the shock with care during removal.
What’s included
Check the package contents against your installation before starting, since mounting parts may be needed.








