Overview
The Pro Comp Suspension ES3000 326500 is a rear hydraulic shock absorber with loop mounts at both ends. It measures 27.07 in extended and 15.94 in collapsed, with 11.13 in of travel. Pro Comp rates it for a 4 to 6 in. lift, so it is intended for a rear suspension that has been raised. No vehicle is named for this part number.
The shock’s twin tube cellular gas design has 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Double welded mounts add strength, and the shock carries the Pro Comp Suspension limited lifetime warranty. The finish is white, and the shock is not adjustable.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position, rated for a 4 to 6 in. lift
- Pro Comp Suspension limited lifetime warranty
Rear suspension lift considerations
Raising the rear of a truck changes the angle of the shock, the driveshaft and the brake lines. A shock built for a raised rear suspension is positioned to handle that new angle, but the rest of the system still needs checking. Pinion angle, brake hose length and the rear track bar should all be reviewed after a rear lift.
Shock length and travel also matter when the springs or blocks change. A damper that is too short can run out of extension on a downhill, while one that is too long may hit the frame. Measuring the current rear height before fitting and comparing it against the new lift gives a more reliable starting point than estimates.
- Review pinion and driveshaft angle
- Check brake hose length
- Measure rear height before fitting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326500 |
| UPC | 614901042399 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 27.07 in |
| Collapsed length | 15.94 in |
| Travel length | 11.13 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 4 to 6 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on your truck’s rear suspension height. Confirm the 4 to 6 in. lift rating against your current rear height, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 to 6 in. lift rating means the shock is designed for a rear suspension raised by that amount. Measure your current rear height and compare the 27.07 in extended and 15.94 in collapsed lengths before fitting.
What’s included
One shock absorber, part 326500.
Not included: the dust boot.










