Overview
The Pro Comp ZX2090 is a front Pro Runner monotube shock absorber for the 1984–2001 Jeep Cherokee (XJ). It is designed for a 3.5 to 4 inch lift and is a nitrogen gas charged monotube on a 2 inch body.
The shock uses multi-stage valving. The monotube design resists cavitation during compression and rebound and sheds heat more efficiently than a twin tube. The brushed, zinc-plated and clear-coated body comes with a rubber bushing and black polyurethane boots. It carries a 90-day ride guarantee and a lifetime warranty that transfers to a new owner.
The 1984 to 2001 Jeep Cherokee (XJ) is the vehicle this part fits, and it is designed for a 3.5 to 4 inch lift. A nitrogen-charged monotube separates the oil and gas with a floating piston, so the oil stays under pressure and foams less during hard compression. The shock is sold as each with a rubber bushing and black polyurethane boots.
Key features
- Front position, direct fit
- Designed for 3.5 to 4 inches of lift
- Nitrogen gas charged monotube
- 2 inch diameter body with brushed zinc and clear coat
- Rubber bushing and black polyurethane boots included
Monotube shock basics
A monotube shock keeps the oil and gas in one tube, separated by a floating piston. That layout keeps the oil under pressure during hard compression, which helps the shock resist fade on rough trails. The nitrogen charge keeps the piston pressed toward the oil side, so foaming is reduced when the shock works quickly.
Monotubes suit lifted Cherokees because they tolerate the heat of repeated climbs and descents. When fitting one, check the lift height against the design range, and confirm the upper and lower mounts and bushings are clean and undamaged. Boots keep grit off the shaft, so inspect them with the shock and replace torn boots before dirt reaches the seals.
- Check the lift height against the design range before fitting
- Inspect the bushing and mounts for wear
- Replace torn boots before dirt reaches the seals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2090 |
| UPC | 614901095029 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 3.5 to 4 in. |
| Body diameter | 2 in |
| Charge | Nitrogen, gas charged |
| Finish | Brushed zinc, clear coat |
| Bushing | Rubber, included |
| Boots | Black polyurethane, included |
| Ride guarantee | 90 days |
| Warranty | Lifetime, transferable |
Vehicle fitment
It is a direct fit for the 1984 to 2001 Jeep Cherokee (XJ), at a 3.5 to 4 inch lift.
The Grand Cherokee ZJ and WJ and the Liberty KJ are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner monotube shock with rubber bushing and black polyurethane boots.

















