Overview
The Pro Comp 926501 is an ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It measures 27.07 inches extended and 16.94 inches collapsed, which gives 10.13 inches of travel.
Confirm fit for your vehicle’s year, model and trim before ordering. Loop-mounted shocks come in several lengths, so measure the loop spacing and the length of the shock you are replacing. Shock boots are sold separately.
Key features
- Loop-style upper and lower mounts
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Loop mount considerations
Loop mounts are a common choice because they use a simple eye at each end that accepts a rubber or poly bushing. The bushing takes the movement, so its condition affects ride quality as much as the shock body does. When bushings crack or flatten, the shock can clunk and the axle can wander slightly under load.
Choosing a replacement loop shock means checking more than length. Eye diameter, bushing width and bracket spacing all affect whether the shock seats correctly. Measure the old shock with the truck at its normal ride height and again with the suspension fully extended, since the travel range determines how far the bushings move.
Replace the bushings whenever the shock comes off, and use a bushing grease suited to rubber or poly. Avoid petroleum products on rubber. Inspect the brackets for cracks and bent tabs, since a shifted bracket changes the shock angle and wears the eye early. Retorque the fasteners after a short drive and again after the first rough trail outing.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926501 |
| UPC | 614901117530 |
| Shock series | ES9000 |
| Extended length | 27.07 in |
| Collapsed length | 16.94 in |
| Travel length | 10.13 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Check fit for your vehicle before ordering. Compare the 27.07 inch extended and 16.94 inch collapsed lengths with your shock, and check the eye size at each end.
Loop-mounted ES9000 shocks with close lengths can still differ in eye size, so check the mounts too. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need matching brackets or bushings. Check the eye spacing against the old shock before installing.
What’s included
The item is one shock absorber, sold as each. Shock boots are sold separately.























