Overview
The Pro Comp 922507 is an ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It measures 22.78 inches extended and 13.78 inches collapsed, which gives 9.00 inches of travel. Both mounts are factory style.
Choose it by comparing its lengths and mounting points with the shock it would replace, and measure before ordering.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory-style upper and lower mounts
Measuring before you buy
Matching a replacement shock starts with measuring the old one. Measure from the center of the upper mount to the center of the lower mount with the shock fully compressed, then again fully extended. The difference between those two figures is the travel, and a replacement with the same extended and collapsed lengths will sit in the same place as the original.
Note the mount type as well as the length. Factory-style eyes and studs differ in diameter and offset, so a shock that measures correctly can still fail to seat if the hardware is wrong. Gas charged shocks are generally used on the same vehicles as hydraulic ones, so the lengths and mounts decide the match rather than the series name.
- Measure eye-to-eye when fully compressed
- Measure again fully extended
- Compare mount diameter and offset
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 922507 |
| UPC | 614901696370 |
| Shock series | ES9000 |
| Extended length | 22.78 in |
| Collapsed length | 13.78 in |
| Travel length | 9.00 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Compare the 22.78 inch extended and 13.78 inch collapsed lengths with the shock on your truck before buying. Make sure your truck’s year, model and trim are covered before you order.
A shock from the same series with a different length may not match your truck, so use the measurements rather than the series name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts at both ends mean the shock is designed to replace a stock unit. Check the mounting hardware against the old shock before starting the job.
What’s included
One shock absorber, sold as each, without a boot.








