Overview
The 60007 is a Nitrocharger Sport shock absorber, gas charged, from the Old Man Emu (OME) 4WD suspension range. It is a universal fit shock.
Valving was set in Australia for conditions where vehicles carry loads and accessories over long distances.
The 60007 is a gas-charged Nitrocharger Sport designed for on-road drivability and off-road touring. Valving was carried out in Australia, and OME development included Outback testing and data logging. Support comes from more than 120 authorised outlets, and the warranty runs 3 years or 60,000 km.
Compare the existing shock’s length and mounting points with your vehicle before choosing this part. Measure rather than relying on a fitment match, and keep the OME springs, bushes and hardware in mind when planning the job.
Key features
- Gas-charged Nitrocharger Sport design
- Built for on-road drivability and off-road touring
- Valving tuned in Australia
- Compatible with OME springs, bushes and hardware
Measuring before you install
Measuring the existing shock is the most useful step before any replacement. Record the eye-to-eye length with the vehicle at ride height, note the stroke by checking how far the shock extends and compresses, and photograph the mounting positions. Comparing these notes with the new shock shows whether it will fit without binding at full extension or compression.
Because a universal fit part is not tied to a model, mounts and clearances need more attention. Check that the shock clears the body, brake lines and axle at full travel, and that the angle matches the old unit. Bushings, bump stops and spacers should be inspected at the same time, since worn parts can change how the shock sits. Take the time to recheck clearance after the first drive.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 60007 |
| UPC | 70000408558 |
| Shock series | Nitrocharger Sport |
| Hydraulic or gas charged | Gas charged |
| Warranty | 3 years or 60,000 km |
| Country of manufacture | Australia |
Vehicle fitment
Check the application for your vehicle before installing. Measure mounting points and overall length against the shock you are replacing.
Valving was set in Australia for loaded use over long distances. Buyers who want to compare stroke, damping or length should measure the existing unit against the new one.
What’s included
One shock absorber is included. Bushes and hardware are not included.








