Overview
The Pro Comp ES9000 Series shock absorber, part number 926513, is a gas charged twin tube shock from Pro Comp Suspension. It has factory upper and lower mounts, a 26.79 inch extended length and a 15.56 inch collapsed length.
The twin tube design and 10 stage velocity sensitive valving are meant to give a smooth, comfortable ride on the highway while improving handling off road. The 1 3/8 inch nylon banded full displacement piston head and double welded shock mounts are built for strength and long lasting durability. This shock is not adjustable and has no remote reservoir.
Key features
- Twin tube design with 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts for maximum strength
- Factory upper and lower mounts
- Gas charged body with no remote reservoir and no external adjustment
Checking measurements before buying
Measurements decide whether a shock fits, so check them before buying. Compare the extended and collapsed lengths of the shock you are removing with the replacement, and note the mount style at each end. Travel should be judged against the same figures, because a shock with the right travel can still bind if its lengths do not match the mounting points.
Gas charged twin tube shocks are sealed units, so they are normally replaced rather than opened. Damping is set inside the shock, which means the unit should be chosen for the vehicle’s load rather than adjusted in the field. Check the mounts, bushings and bolts while the old shock is off, and reuse the old boot only if it is still in good condition.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926513 |
| UPC | 614901072396 |
| Shock series | ES9000 |
| Extended length | 26.79 in |
| Collapsed length | 15.56 in |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Piston head | 1 3/8 in nylon banded, full displacement |
| Valving | 10 stage velocity sensitive, twin tube |
| Charge | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot | Not included |
Vehicle fitment
No vehicles are matched to this shock. Measure the extended and collapsed lengths of your current shock and compare them before ordering, since travel depends on the vehicle.
Compare these measurements with your vehicle’s specifications before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, finished in white.
Not included: dust boot.












