Overview
The Pro Comp ES9000 Series front shock absorber, part number 914514, is a gas-charged twin-tube shock that uses the factory upper and lower mounts. Pro Comp designs the ES9000 for a smooth, comfortable ride that also controls the suspension off road.
The valving is 10-stage and velocity sensitive, so damping changes with how fast the shock moves. Slow movements on smooth pavement feel comfortable, and faster movements off road get firmer control. The valving also improves off-road handling and performance.
The piston head is a 1 3/8 nylon banded full displacement design, and the shock mounts are double welded. Pro Comp describes both as features for maximum strength and long-lasting durability.
The shock measures 14.71 inches extended and 9.56 inches collapsed. Travel length is vehicle specific, so compare these lengths with the original shock before ordering.
- Gas-charged twin-tube design
- 10-stage velocity sensitive valving
- 1 3/8 nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
- White shock finish, non-adjustable, no remote reservoir
Before you buy
A shock absorber works with the springs, bushings and tires to set ride quality. When one shock loses damping, the vehicle can rock after bumps, feel loose in corners and wear tires unevenly. Replacing shocks on the same axle keeps damping balanced, which is easier to control than mixing an old unit with a new one.
Compare the new shock’s extended and collapsed lengths with the original, because length determines whether the piston has enough travel and whether the mounts line up. Gas charged shocks are often chosen for steadier damping during repeated firm strokes. While the vehicle is raised, check the mounting hardware and rubber bushings, and replace any that are cracked or worn.
- Check the old shock for leaks or dents
- Inspect upper and lower bushings
- Tighten fasteners to the vehicle’s specification
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914514 |
| UPC | 614901070217 |
| Series | ES9000 |
| Position | Front |
| Extended length | 14.71 inches |
| Collapsed length | 9.56 inches |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Charge | Gas charged |
| Finish | White |
| Boot included | No |
| Lift or drop | 0 inches |
| Sold as | Each |
Vehicle fitment
It is a direct fit for the 1993–1998 Toyota T100 in the Base, DLX, DX and SR5 versions. Other Toyota trucks and years are not covered by this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock uses the factory upper and lower mounts, it replaces the original shock at the same mounting points. Compare the extended and collapsed lengths with the original shock before installing it.
What’s included
One shock absorber, sold each. The dust boot is not included.










