Overview
The Pro Comp ES9000 Series shock absorber, part number 914500, has loop-style upper and lower mounts and measures 14.94 inch extended and 9.85 inch collapsed. That gives 5.09 inch of travel. It is non-adjustable, finished in white, and sold individually.
Use the dimensions to check fit: compare the 14.94 inch extended length and 9.85 inch collapsed length with the shock you are replacing. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Loop upper and lower mounts.
- 14.94 inch extended length and 5.09 inch travel.
- Non-adjustable damping.
- Sold individually.
- Shock boots are sold separately.
Choosing boots and mounts
Loop-style mounts are simple and easy to inspect, but the eyes and their bushings take the full load of each bump. Before installing, check the eyes for cracks, elongated holes and play. Replacing worn bushings or hardware at the same time keeps the new shock aligned with the axle and prevents uneven wear on the mounts.
A dust boot protects the shaft from grit, road spray and mud. Because boots are sold separately here, decide before ordering whether your use calls for one. Trucks driven in sandy or muddy conditions usually benefit from a boot, while occasional highway use may not need one. Keep the shaft clean regardless, and wipe it after washing the truck.
- Inspect loop eyes for cracks and play
- Decide on boots before ordering
- Clean the shaft after mud or wash-downs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914500 |
| UPC | 614901070156 |
| Shock series | ES9000 |
| Extended length | 14.94 inch |
| Collapsed length | 9.85 inch |
| Travel length | 5.09 inch |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Dust boot included | No; sold separately |
| Sold as | Each |
Vehicle fitment
Measure the mount-to-mount distance on the truck and compare it with the 14.94 inch extended and 9.85 inch collapsed lengths before ordering.
Loop mounts must match the eyes on the new shock, so confirm the mount style on your truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the existing shock at both mounts and compare it with the 14.94 inch extended and 9.85 inch collapsed lengths before removing it. A boot is not included, so check whether your application needs one.
What’s included
One shock absorber.
Not included: shock boots, which are sold separately.












