Overview
The Fox Racing Shox 2.0 Series emulsion shock with remote reservoir, part number 980-24-039, has a 2.0 inch body, 11 inch travel, a 5/8 inch shaft and a bushing mount. The remote reservoir measures 2.0 x 11.0 in., and the finish is black and cadmium. It is a universal fit shock, so length, travel and mounting style must match your application before you choose it.
Smooth Body shocks from Fox come in many features and sizes and can be valved for the way a vehicle is driven. The extended length is 28.1 in. and the collapsed length is 17.1 in., so measure those against the mounting points on your vehicle.
Key features
- Emulsion design with remote reservoir
- 2.0 inch body diameter
- 11 inch travel
- 5/8 inch shaft diameter
- Bushing mount
- Black and cadmium finish
Remote reservoir clearance
A remote reservoir adds a second body and a hose, so the shock needs clearance in two places: the damper and the reservoir. Mount the reservoir where it stays clear of tires, frame and moving linkage through full travel. Leave enough hose length to flex without kinking, since a pinched hose can restrict oil flow.
Bushing mounts put the shock’s load on rubber or polymer bushings, which wear over time and should be checked along with the bolts. Emulsion shocks are often chosen for steady damping under repeated hits. When replacing one, match length, travel and mount at both ends so the suspension works as it was designed.
- Measure clearance at full bump and full droop
- Check the hose for chafing after each trip
- Inspect bushings for splitting
- Tighten mounting bolts after the first few trail runs
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-039 |
| UPC | 70000462464 |
| Series | 2.0 Series emulsion with remote reservoir |
| Body diameter | 2.0 in. |
| Reservoir size | 2.0 in. x 11.0 in. |
| Travel | 11 in. |
| Shaft size | 5/8 in. diameter |
| Extended length | 28.1 in. |
| Collapsed length | 17.1 in. |
| Mounting | Bushing |
| Finish | Black and cadmium |
| Shock type | Gas charged |
| Fit type | Universal fit; no specific vehicle is named |
Vehicle fitment
No specific vehicle is named for this shock. Because it is a universal fit design, shock length, travel and mount style decide whether it works on a particular vehicle. Measure the 28.1 in. extended and 17.1 in. collapsed lengths against the shock you are replacing before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The remote reservoir adds bulk to the shock, so allow clearance for the reservoir, listed at 2.0 x 11.0 in., and its hose before mounting.
What’s included
Check the package contents for mounting hardware, and confirm quantity and sale unit when the shock arrives.









