Overview
The Rancho RS7367 is a rear monotube shock from the RS7000MT Series for the 2009–2010 Dodge Ram 1500 and 2011–2018 Ram 1500 trucks. Its lift setting is w/0 in. Lift/Drop, meaning no lift or drop is applied for this application.
It is gas charged with application specific valving and a brushed-zinc clear coated finish, and it is made in America.
Key features
- Monotube, high pressure gas charged design
- Application specific valving
- 2 inch diameter shock body
- Brushed-zinc finish with clear coat
- Direct fit mounting for the listed Ram 1500 trucks
Lift, drop and ride height
Lift and drop describe how far the truck sits from its factory height, and they decide how a rear shock should be matched. A shock set for no lift or drop suits a truck that is still at stock height. If the rear suspension has been modified, compare the ride height at the rear axle before ordering, because shock length and stroke need to suit the new geometry.
Rear shocks handle rebound and compression from the springs and axle, so they influence how the back of a pickup settles after bumps. Tire wear across the rear axle, a bouncy ride and oil on the body are common signs of an aging shock. When replacing a rear shock, inspect the mounts and bushings, and check the bump stops for cracks.
- Measure ride height at the rear before ordering
- Compare any lift or drop with the shock setting
- Check the mounts and bushings
- Inspect the bump stops
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7367 |
| UPC | 10039703003428 |
| Shock series | RS7000MT Series |
| Position | Rear |
| Shock type | Monotube, gas charged |
| Lift height | w/0 in. Lift/Drop |
| Body diameter | 2 inch |
| Finish | Brushed-zinc, clear coated |
| Mounting | Direct fit |
Vehicle fitment
The 2009–2010 Dodge Ram 1500 covers Laramie, SLT, ST, Sport, TRX and TRX4 trims. The 2011–2018 Ram 1500 covers Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman and Tradesman HD trims.
Ram 2500 and 3500 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift setting is w/0 in. Lift/Drop, so compare your truck’s suspension height with that setting before installing these rear shocks.
What’s included
The RS7367 rear shock.
Not included: Check the contents for a boot or bushing type before installing.












