Overview
The Pro Comp ES3000 Series Shock Absorber, part number 332003 (EXP332003), is a rear twin tube shock for older Dodge W-series pickups and the Plymouth Trailduster. It fits the 1972-1993 Dodge W150, W200, W250, W300 and W350, and the 1976-1981 Plymouth Trailduster.
It is a twin tube cellular gas design with 10 stage velocity sensitive valving, a large 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts. It is made for a 2.5 to 4 inch lift.
The double welded shock mounts add strength, and the 10 stage velocity sensitive valving adjusts to road conditions as you drive. Extended, collapsed and travel lengths depend on the vehicle, so confirm them for your truck before ordering. The ES3000 carries Pro Comp’s limited lifetime warranty.
Key features
- Twin tube cellular gas design.
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory-style upper and lower mounts
- For use with a 2.5 to 4 inch lift
- Not adjustable, no remote reservoir, no boot included
- Limited lifetime warranty.
Choosing a replacement shock
A rear shock controls how quickly the springs and axle move after a bump, which affects steering feel, body control and tire contact on both pavement and trail. On an older truck, worn shocks often show up as bouncing after dips, nose dive under braking, or a rear end that keeps moving after the vehicle has settled. Before replacing one, look for fluid seeping down the shock body, dented or bent shafts, broken mounting bushings and uneven tire wear.
When choosing a replacement, match the mounting style and collapsed and extended lengths to your truck, and consider how much lift is already installed. A shock sized for stock height may bind on a lifted setup, so measure first. Shocks are usually replaced in pairs on the same axle so both sides damp the same way, and bump stops and leaf spring hardware are worth inspecting at the same time.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332003 |
| Alternate part number | EXP332003 |
| UPC | 614901042917 |
| Product type | Rear shock absorber |
| Series | ES3000 |
| Position | Rear |
| Lift height | 2.5 to 4 inches |
| Shock type | Hydraulic, twin tube |
| Extended, collapsed and travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
The Pro Comp ES3000 332003 shock fits the 1993 Dodge W150, the 1972-1980 W200, the 1981-1993 W250, the 1972-1980 W300, the 1981-1993 W350 and the 1976-1981 Plymouth Trailduster. Years differ by model. Confirm your vehicle’s year, model and trim before ordering.
Years differ by model, and the list does not include other model years or newer Dodge and Ram trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the extended and collapsed lengths against your vehicle before installing, since ES3000 shocks are made to vehicle-specific lengths. Tighten the factory-style mounts to the torque figures for your vehicle, and make sure the shock clears brake lines and does not bind through full travel.
What’s included
- One ES3000 rear shock absorber









