Overview
The Fox Racing Shox 985-24-039 is a front Fox 2.0 Performance Series reservoir shock for 2007–2015 Jeep Wrangler (JK) vehicles, covering the trims shown below. The shock is rated for a 2.5 to 4 inch lift range, so it suits JK builds with a moderate to large suspension lift in the front.
The metal-impacted aluminum body is designed to move heat away faster than steel. Fox pairs it with an Internal Floating Piston that separates the shock oil from a nitrogen gas chamber.
Key features
- Front position, for the front axle of a JK
- Metal-impacted aluminum shock body
- Internal Floating Piston with nitrogen gas chamber
- Direct fit bolt-on replacement
- Lift range of 2.5 to 4 inches
- Extended 25.80 inch, collapsed 15.70 inch and 10.10 inch stroke
Front shock on a lift
The front shock on a JK works hard on a lifted build. Steering input, braking and uneven terrain all load the damper, and heat builds quickly during long off-road climbs. A body that sheds heat well and an oil system that resists foaming help the shock hold its damping over repeated hits.
When choosing a front shock for a lift, match the length to the new ride height so the shock is not bottoming or fully extended at the limits of travel. Check steering clearance and sway bar links at full lock as well. Cycling the suspension by hand after installation shows whether anything rubs at full compression or extension.
Inspect shocks regularly for oil on the body, a dented tube or worn eye bushings. Clunks over bumps can come from loose mounts rather than the shock, so check those first. Re-torque mounting hardware after the first few drives on new hardware.
- Steering and brake line clearance
- Sway bar link condition
- Mount bushing wear
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-039 |
| UPC | 700007193795 |
| Series | Fox 2.0 Performance Series |
| Position | Front |
| Body | Metal-impacted aluminum, smooth body reservoir |
| Internal design | Internal Floating Piston with nitrogen gas chamber |
| Mounting | Direct fit |
| Lift height | 2.5 to 4 in. lift |
| Extended length | 25.80 in |
| Collapsed length | 15.70 in |
| Stroke | 10.10 in |
Vehicle fitment
The shock fits 2007–2015 Jeep Wrangler (JK) models in the 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X trims.
2016 to 2018 JK models fall outside this fit, and the newer JL platform is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cycle the front shock by hand after mounting to confirm the body clears the frame and linkage through its full stroke.
What’s included
Check the package contents against your installation before starting, and confirm the mounting hardware you need is on hand. Hardware needs vary with the vehicle, so count bolts and brackets first.







