Overview
The Pro Comp Suspension ES3000 321553 is a hydraulic shock absorber for the 2008–2016 Ford F-250 Super Duty and the 2008–2016 Ford F-350 Super Duty, in the King Ranch, Lariat, Platinum, XL and XLT versions of both trucks. It uses the factory upper and lower mounts, and its lengths are set to the vehicle.
The ES3000 body is a twin tube cellular gas design with 10-stage velocity-sensitive valving. A 5/8 inch chrome-hardened piston rod and a Teflon rebound stop are part of the design, along with double welded mounts. The shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Super Duty loads and damping
Super Duty trucks are built for heavier loads and towing, which puts more demand on the front and rear suspension. A shock on a truck that regularly carries cargo or pulls a trailer works harder than one on a lightly loaded vehicle, so its condition affects handling and braking more directly.
When replacing a shock on a Super Duty, inspect the mounts carefully, since they carry significant force. Factory mounts should seat at the original points, and bushings should be checked for wear. Suspension work is often done alongside shock replacement, so inspect leaf springs, bump stops and steering components at the same time.
- Inspect mounts for cracking or looseness
- Check leaf spring hangers and bushings
- Inspect bump stops for compression wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321553 |
| UPC | 614901041859 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2008–2016 Ford F-250 Super Duty (King Ranch, Lariat, Platinum, XL and XLT) and the 2008–2016 Ford F-350 Super Duty (King Ranch, Lariat, Platinum, XL and XLT).
Ford Super Duty trucks from 2007 and earlier, from 2017 and later, and the F-150 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Super Duty trucks carry heavier loads, so check the vehicle-specific lengths against the shock being replaced before ordering. Because the mounts are factory, the shock should go in at the original points.
What’s included
One shock absorber, part 321553.
Not included: the dust boot.












