Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 980-24-888, is a direct replacement shock absorber with a 2.0 inch body and a 5/8 inch shaft, built for bolt-on mounting on 2WD and 4WD vehicles.
Each direct replacement shock is built to maximize suspension travel and performance on and off the road. This IFP model uses an internal reservoir and is a hydraulic, gas-charged shock from the 2.0 Shock Series.
Key features
- Internal reservoir (IFP) design with a gas-charged chamber
- OEM direct replacement mounting for bolt-on installation
- 2.0 inch body diameter and 5/8 inch shaft diameter
- Black and aluminum finish
- Fits 2WD and 4WD applications
- Travel and extended and collapsed lengths are application specific
Installing a direct replacement shock
A direct replacement shock is meant to bolt into the factory mounts, but the lower and upper mounting positions still need checking. Compare the new shock’s collapsed length with the old one before removing anything, and keep the factory shock on hand if you need to measure the mount-to-mount distance.
The IFP construction keeps oil and gas charge in one body, so it should never be heated, punctured, or opened during installation. Torque mounting bolts to the vehicle’s specification after the first few drives, and check the bushings for play at the same time.
- Measure mount-to-mount distance on the old shock
- Keep the body intact and never heat or puncture it
- Check bushings and bolts after the first few drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-888 |
| UPC | 70000562129 |
| Series | 2.0 Performance Series IFP |
| Body diameter | 2.0 inch |
| Shaft diameter | 5/8 inch |
| Finish | Black and aluminum |
| Reservoir | Internal |
| Mounting | OEM direct replacement |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Drive type | 2WD and 4WD |
Vehicle fitment
Match its mounting points and lengths to the factory shock on your vehicle before installing, since it is a direct replacement.
Confirm the year, make, model and trim fit your vehicle before ordering, and check the mounting points against the shock you are replacing.
Installation notes
The IFP design keeps shock oil and a pressurized gas chamber in one body, so do not heat, puncture or open the shock.
What’s included
One shock is included, sold on its own.
Not included: Mounting hardware and other suspension parts may be needed; check what the job requires before starting.










