Overview
The Pro Comp Suspension ES3000 323543 is a hydraulic shock absorber from the ES3000 Series. It uses the factory upper and lower mounts, and its extended, collapsed and travel lengths are set to the vehicle rather than a fixed figure. No make, model or year is named for this part number.
The shock is built around a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop support comfortable highway driving and heavier use. Double welded mounts add strength, and the shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Replacing shocks at the right time
There is no fixed schedule for replacing shocks, since wear depends on driving and climate. Common signs include fluid leaking from the body, a bouncy ride after bumps, nose dive under braking, and tires with cupped or scalloped wear. A simple test is to push down on a corner and see whether the body rebounds more than once.
Replace shocks in pairs on the same axle so damping stays balanced. While doing so, inspect the springs, bump stops and mount bushings, since worn parts can shorten the life of new shocks. Keep a record of the replacement date and mileage to help plan future service.
- Leaks on the body or seal area
- Bounce that continues after a bump
- Cupped or scalloped tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 323543 |
| UPC | 614901323542 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit should be checked against your year, model and trim before buying. Measure the factory mount points and the lengths of the shock being replaced.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 323543.
Not included: the dust boot.









