Overview
The Pro Comp Suspension 4041 is a two-piece CV style rear drive shaft made of steel. It is designed for 4 to 5 inches of lift and is built to work with Pro Comp slip yoke eliminator kits.
The shaft measures 17 inches collapsed and 21.5 inches extended. It is a universal fit, so confirm the length your driveline needs before ordering.
Key features
- Two-piece CV style design
- Steel construction
- Requires a slip yoke eliminator
- 17 inch collapsed length and 21.5 inch extended length
- Rear position
Driveline angles after a lift
A rear drive shaft transmits power from the transfer case to the axle while the suspension moves up and down. Once the vehicle is lifted, the angles at each joint change, and a shaft that was correct at stock height can begin to vibrate or wear faster if the geometry is off.
Angles, length and the slip yoke eliminator work together. After installation, check the joint angles at ride height and look for vibration at highway speed. Adjusting pinion angle or the lift components may be needed when the numbers fall outside the range the driveline can handle.
- Confirm the eliminator is in place before the shaft
- Check joint angles once the truck sits at ride height
- Inspect the yokes and joints after rough trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 4041 |
| UPC | 614901694161 |
| Lift range | 4 to 5 in |
| Collapsed length | 17 in |
| Extended length | 21.5 in |
| Construction | Two-piece steel |
| Joint type | CV |
| Position | Rear |
| Slip yoke eliminator | Required |
Vehicle fitment
Measure your driveline before ordering, since the collapsed and extended lengths must suit the transfer case and pinion positions after the lift.
The shaft is intended for use with a Pro Comp slip yoke eliminator kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shaft is designed to work with a slip yoke eliminator, check that the eliminator is installed before fitting the shaft, and have the driveline angles checked after a lift.
What’s included
One rear CV style drive shaft. The slip yoke eliminator is sold separately.
Not included: Slip yoke eliminator kit.





