Overview
It is a set of front alignment eccentrics and cams that adjust camber and caster. A lifted vehicle changes camber and caster, and these cams are installed to bring the front alignment back in line.
Key features
- Alignment eccentrics and cams
- Adjusts camber and caster
- Front position
Why lifts change alignment
Raising a vehicle changes the geometry of the control arms and the angle of the steering axis. That shift can move camber, which affects how the tire sits on the road, and caster, which affects straight line stability and steering return.
Eccentric cams are offset bushings or plates that rotate to move a control arm or strut. Turning them shifts the angle in small steps, so the setting is made gradually and then locked in place. Cams are usually adjusted with the vehicle at ride height and its weight on the wheels.
Tie rod ends, ball joints and control arm bushings should be inspected before the alignment is set, because worn parts make the setting drift quickly. Fasteners should be tightened to the values given in a service manual.
- Inspect tie rod ends and ball joints
- Set the alignment after the cams are installed
- Recheck the setting after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 532 |
| UPC | 614901112191 |
| Adjusts | Camber and caster |
| Position | Front |
Vehicle fitment
Verify fit against your vehicle’s year, model and trim before buying, since the cams must match the front suspension you are working on.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Camber and caster should be set with a wheel alignment after the cams are installed.








