Overview
The Pro Comp Suspension 20-65226 is a pair of front adjustable cam bolts for the Jeep Wrangler (TJ). The cams fit the upper control arm and adjust pinion angle, which can help eliminate driveline vibration.
Key features
- Front alignment cam bolts
- Adjusts pinion angle
- Helps eliminate driveline vibration
- Sold as a pair
Setting pinion angle and driveline
Pinion angle is the relationship between the driveshaft and the rear axle pinion. When it is off, the driveshaft can vibrate at speed and the U-joints wear faster than they should. Adjustable cams let you change that angle at the upper control arm instead of relying on shims or spacers, which many owners find easier to set during a rebuild.
Before adjusting, inspect the U-joints, slip yoke and transfer case output for wear, because worn parts can cause a vibration that looks like an angle problem. After setting the cams, road test at the speeds where the vibration showed up and recheck the angles with a level or driveline gauge.
- Check U-joints for play before setting cams
- Recheck driveline angles after the first drive
- Note the cam position before and after each change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 20-65226 |
| UPC | 614901112207 |
| Position | Front, upper control arm |
| Adjustment | Pinion angle |
| Sold as | Pair |
Vehicle fitment
The cams are built for the Jeep Wrangler TJ upper control arm, which covers 1997 to 2006 Wrangler TJ models.
They are not made for other Wrangler generations or other Jeep models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Adjustable cams change the pinion angle, so check the driveline angles and the vibration after setting them.
What’s included
A pair of front adjustable cam bolts.










