Overview
The Rubicon Express RE1478 alignment cam washers are cam bolt kits for the 2007–2018 Jeep Wrangler (JK), including the Unlimited versions. The kit is typically used on lifts up to 3 inches.
The rear cam bolts adjust pinion angle to keep driveline phasing correct. Rubicon Express says they usually give only 2-3 degrees of adjustment. The front JK cam bolts adjust caster, the angle that sets steering return and straight-line stability.
The kit is an alternative to adjustable upper control arms, offering a simpler way to correct alignment after a lift. It is for JK models, so confirm fit for any other Wrangler before ordering.
Key features
- Front cam bolts adjust caster on JK Wranglers
- Rear cam bolts adjust pinion angle for driveline phasing
- Usually gives 2-3 degrees of adjustment
- Typically used on lifts up to 3 inches
- An alternative to adjustable upper control arms
Alignment after a lift
Cam bolts give the front and rear of a Wrangler JK a way to set caster and pinion angle after a lift, which keeps the steering settled and the driveline phased. Because the adjustment range is limited, the bolts work best as part of a complete alignment plan rather than as the only correction. Setting them after the lift is installed keeps the numbers accurate.
A four-wheel alignment should follow any cam change, and the shop should measure caster and pinion angle with the vehicle loaded the way it is normally driven. Watch for uneven tire wear, a wandering steering wheel or vibration at speed, since these are signs the angles have moved. Recheck the cam bolts after the first few trail runs, then at regular service intervals.
- Set cam bolts after the lift is installed
- Align the vehicle after any cam change
- Measure caster and pinion angle under normal load
- Watch for tire wear and steering drift
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1478 |
| UPC | 614901453300 |
| Type | Alignment cam washers (cam bolt kit) |
| Position | Front |
| Rear cams | Set pinion angle and driveline phasing |
| Front cams | Set caster |
| Typical adjustment | 2-3 degrees |
| Typical lift | Up to 3 inches |
| Fitment | 2007-2018 Jeep Wrangler (JK) |
Vehicle fitment
Rubicon Express lists these cam bolt kits for the 2007–2018 Jeep Wrangler (JK) across the Sport, Sahara, Rubicon and X trims, along with the Unlimited versions of those trims.
It fits the 2007–2018 Jeep Wrangler (JK) only. Check the year, model and trim of your Wrangler before purchase, especially for TJ, LJ or JL models.
Installation notes
Set the cam bolts after the lift is installed, then align the vehicle, because caster and pinion angle changes affect the alignment.
What’s included
The cam bolt kit. Confirm the included hardware against your installation before starting.












