Overview
The Pro Comp Suspension EXP55808B is an adjustable front track bar for the 2007 to 2018 Jeep Wrangler JK, in two-door and four-door models. It replaces the stock front track bar and is designed for vehicles with 2.5 to 4.5 inches of lift.
The adjustable design gives more clearance between steering components than the stock bar and re-centers the front axle after a lift is installed. Installation is bolt-in, using the factory mounts.
Key features
- Replaces the stock front track bar on the JK
- Designed for 2.5 to 4.5 inches of lift
- Adjustable length to re-center the front axle after a lift
- Bolt-in installation with factory mounts
- Constructed from 3/8-inch wall steel tubing
- Semi-gloss black powder coat finish
Tracking Changes After a Lift
Lifting a Wrangler JK changes the geometry of the front axle and steering, and a stock track bar can end up short or at the wrong angle. An adjustable bar lets the axle be re-centered without rebuilding the steering. Because the bar sits between the axle and frame, it has a direct effect on how the vehicle tracks on the road.
Owners often replace the track bar together with a drag link or tie rod ends when they lift the vehicle, since these parts share the same steering geometry. Check the bushings and ball joints for play, and look for uneven tire wear that may point to an alignment issue. After any change, have the front end aligned before returning to regular driving.
- Inspect the track bar bushings for cracks or play
- Check drag link and tie rod ends together
- Watch for uneven front tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP55808B |
| Position | Front |
| Lift height | 2.5 to 4.5 in |
| Material | Steel tubing, 3/8 in wall |
| Finish | Semi-gloss black powder coat |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK in two-door and four-door models, including the Unlimited.
It is not made for the JL or the TJ and LJ generations. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
It bolts in using the factory mounts, so no drilling or welding is needed. Alignment is set through the adjustable length after installation.
What’s included
The adjustable front track bar under part number EXP55808B.








