Overview
The Pro Comp JTB403 is a front adjustable track bar built for a Dana 44 front axle on a Jeep Wrangler with a 3 to 4 inch lift. It locates the front axle accurately and is made of 4130 chromoly tubing with an aircraft quality high angle rod end. The position is front, with part code EXPJTB403. It needs the EXP55300 track bar bracket to mount.
Fitment covers the 2005-2006 Jeep Wrangler (LJ) in the Unlimited Rubicon trim and the 2003-2006 Jeep Wrangler (TJ) in the Rubicon trim. Since the bar is set for a Dana 44 axle, confirm the axle type as well as the model year before ordering.
Key features
- Dana 44 front axle application
- 4130 chromoly tubing
- High angle rod end for maximum articulation
- Adjustable front track bar
- Requires the EXP55300 track bar bracket
- Direct-fit design for the listed models
Bracket and axle type checks
A front track bar works with the axle housing and the bracket that mounts it, so the bar, bracket and axle type have to match. Dana 44 axles are common on heavier Wrangler builds, and their mounting points differ from other axles. Confirm the axle type before buying, since a mismatch will prevent a clean install.
Mounting a track bar to a bracket changes the bar angle, so the bar length and steering geometry should be set together. Check the bracket welds and bolts after the first few trail runs, and look for cracks at the bracket plate. Recheck steering centering whenever the lift height or tire size changes.
- Verify axle type before ordering
- Inspect bracket welds for cracks
- Recheck steering centering after changes
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | JTB403 |
| Listed part code | EXPJTB403 |
| UPC | 614901117172 |
| Position | Front |
| Axle | Dana 44 |
| Material | 4130 chromoly tubing |
| Lift range | 3 inch to 4 inch |
| Required bracket | EXP55300 track bar bracket |
Vehicle fitment
It fits the 2005-2006 Jeep Wrangler (LJ) in the Unlimited Rubicon trim, and the 2003-2006 Jeep Wrangler (TJ) in the Rubicon trim.
The list does not include other LJ or TJ trims, or other Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The EXP55300 bracket is required to mount this track bar, so both parts are needed. Check the steering centering and the bump steer after the install, and align the front end once the bar length is set.
What’s included
The kit is the adjustable front track bar. The bracket is not included and is required, so both parts are needed. Check hardware against your installation before starting.
















