Overview
The Pro Comp 97 Series Rock Crawler Monster Mod in 17×9 inches is a gloss black steel wheel, part number PCW97-7985, with a 5 on 5.5 bolt pattern and a 108 center bore. Pro Comp Steel Wheels sells it for off-road trucks and four-wheel-drive builds that need a 17 inch steel wheel with a powder coated finish.
The -19 offset places the mounting face well behind the centerline, so this wheel sits farther out from the hub than a wheel with a small or positive offset. The 4.25 backspacing is the distance from the mounting face to the rim’s back edge. The wheel is steel with careful welding and a powder coat finish.
Key features
- Steel wheel with a gloss black powder coat finish
- 17 inch diameter and 9 inch width
- Holes-style face from the Monster Mod line
- 5 on 5.5 bolt pattern
- 108 center bore
- -19 offset and 4.25 backspacing
Matching tires to a wide wheel
A 9 inch wide rim changes the way a tire sits on the vehicle, so tire width and sidewall height should be chosen together with the wheel. A tire that is too wide for the rim can pinch the bead and wear unevenly, while a tire that is too tall can rub the fender on compression. Check the load rating of the tire against the vehicle’s loaded weight, not only its tire size.
Steel wheels are heavier than aluminum ones, which adds unsprung weight to each corner. That can make the suspension feel less responsive on rough terrain, so a heavier wheel is a good reason to inspect ball joints and wheel bearings more often. Keep the lug nuts torqued to the vehicle’s specification and recheck them after the first few runs on a new setup.
- Confirm tire sidewall clearance at full lock and under suspension compression.
- Inspect the bead seat for dents or rust before mounting the tire.
- Re-torque the lug nuts after the first trail outing.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW97-7985 |
| Series | 97 Series Rock Crawler Monster Mod |
| Construction | Steel |
| Style | Holes |
| Finish | Gloss black powder coat |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -19 |
| Backspacing | 4.25 |
Vehicle fitment
No model year or chassis code is confirmed for this wheel. The 108 center bore and 5 on 5.5 bolt pattern must match the hub, and the -19 offset affects clearance at the fender and steering components. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 9 inch wide rim at -19 offset pushes the tire well outward, so check that the tire clears the fender and any flares at full steering lock. Verify the lug nut seat type before mounting, since steel wheels are commonly paired with a specific nut style.
What’s included
The package is the 17×9 wheel alone (PCW97-7985). No center cap is included.
Not included: Center cap and lug nuts for part PCW97-7985, which are sold separately.











