Overview
The Pro Comp 51 Series Rock Crawler 15×8 wheel, part number PCW51-5866, is a 15-inch steel wheel with an 8-inch width. It has a 5 on 4.5 bolt pattern and a gloss black finish in a windowed style.
This version has an 83 center bore and a -19 offset with a backspacing of 4.5. The backspacing is deeper than the 3.75 used on several other sizes in this series. It is a steel wheel sold in a range of sizes and backspacings, and it is universal fit.
Key features
- Steel construction
- 15-inch diameter, 8-inch width
- 5 on 4.5 bolt pattern
- Center bore 83
- Offset -19 with backspacing 4.5
- Gloss black windowed style
Backspacing and caliper room
Backspacing measures how far the mounting face sits from the back lip of the wheel, so it governs how much room the wheel has behind the face for brake calipers, brake lines and inner suspension parts. A deeper backspacing gives more clearance toward the caliper but can move the tire inward relative to the fender. When comparing wheels in a series, look at backspacing and offset together, because the two figures determine how the wheel sits on the hub.
Gloss black finishes show scratches and trail grime more readily than flat coatings. Rinse mud from the barrel and spokes after each run, and touch up chips with a matching paint before corrosion can start under the coating. Inspect the bead seats and valve stem area after tire changes, since a worn seal there causes slow leaks that are easy to miss.
- Measure caliper clearance with the tire on and the steering at full lock
- Keep the same backspacing on all four corners
- Retorque lug nuts after the first few drives
- Replace a wheel that shows cracks near the hub face
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5866 |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -19 |
| Backspacing | 4.5 |
| Style | Windowed |
| Finish | Gloss black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
No vehicle is named for this 15×8 wheel. Match the 5 on 4.5 hub and 83 center bore first, then check the backspacing and -19 offset against the caliper and inner suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4.5 backspacing gives a different inner clearance than the 3.75 versions, so confirm the caliper fit for this exact part number before mounting.
Steel construction suits rough terrain use, and the 15×8 size comes with a 4.5 backspacing. Check the -19 offset and 83 center bore against the hub and the fender before mounting.
What’s included
Not included: center cap and lug nuts, which are sold separately.











