Overview
The Pro Comp Series 252 Street Lock in 16×8 inches is a gloss black windowed steel wheel, part number PCW252-6881, drilled for an 8 on 6.5 bolt pattern with a 131 center bore. It is part of Pro Comp Steel Wheels’ Series 252 line, which the brand sizes and backspaces for off-road vehicles that run a heavy-duty steel rim.
The wheel carries a -6 offset, which places the mounting face slightly behind the centerline, and a 4.25 backspacing that measures the room behind the mounting face. The 131 center bore centers the wheel on the hub, so measure the hub bore before ordering.
Key features
- Windowed steel design with a gloss black powder coat
- 16 inch diameter and 8 inch width
- 8 on 6.5 bolt pattern
- 131 center bore
- -6 offset and 4.25 backspacing
- Series 252 Street Lock styling
Hub fit and lug layouts
An 8 on 6.5 layout is less common than the 5 and 6 lug patterns, so parts that fit a standard hub may not fit this one. Lug nuts, studs and any adapter must all match the eight holes and their seats. Hub-centric rings are often used when the wheel bore is larger than the hub spigot, but a ring should be chosen to fill the gap exactly rather than forced in.
Eight lug nuts take more tightening time, so a torque check after the first drives is worth the effort. Tighten in a star pattern and go around twice. Inspect the lug seats and stud threads at each tire rotation, looking for burrs, rust or stretched studs that can let a wheel work loose on the trail. Keep the mounting face clean so the wheel seats flat against the hub.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW252-6881 |
| Series | 252 Series Street Lock |
| Construction | Steel |
| Style | Windowed |
| Finish | Gloss black powder coat (the spec sheet says black) |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | -6 |
| Backspacing | 4.25 |
Vehicle fitment
No vehicle with years or a chassis code is confirmed for this wheel. The 8 on 6.5 pattern is a less common lug layout, so the hub must have eight holes on that spacing. Compare the -6 offset and 4.25 backspacing with the fender and brake clearance of the vehicle you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 131 center bore must match a hub of the same size, or a hub-centric ring must be used to fill the gap. Use lug nuts that seat on the eight holes and tighten them in a star pattern.
What’s included
The 16×8 wheel (PCW252-6881) is sold alone, without a center cap.
Not included: Center cap and lug nuts for part PCW252-6881, which are sold separately.









