Overview
The Pro Comp 97 Series Rock Crawler is a 15×10 inch steel wheel in flat black, part number PCW97-5185F, drilled for a 5 on 5.5 bolt pattern with a 108 center bore. It is a wide steel wheel from Pro Comp Steel Wheels’ Rock Crawler Series 97, meant for off-road trucks and SUVs that run a heavy-duty steel wheel.
The -44 offset is a large negative figure that places the mounting face well behind the centerline and moves the wheel far outward from the hub. The 3.75 backspacing measures the room between the mounting face and the rim’s back edge. The wheel is a steel rim with a flat black powder coat.
Key features
- Steel construction with a flat black powder coat
- 15 inch diameter and 10 inch width
- 5 on 5.5 bolt pattern
- 108 center bore
- -44 offset and 3.75 backspacing
- Holes-style face
Fitment and wide-rim clearance
A wide rim with a large negative offset changes the tire’s position more than most wheel upgrades. The tire moves outward toward the fender and the steering components, and the back of the rim sits closer to the brake parts. On the trail, that extra spread can help stability on uneven ground, but it also raises the chance of the tire rubbing on rocks or on suspension arms at full articulation.
Tire choice matters as much as the wheel. A tire with a taller or wider profile needs more room, and a heavier tire adds load to the wheel, hub and bearings. Many builders pair a wheel like this with a suspension or fender change, so the setup is checked as a whole rather than one part at a time. Steel wheels are heavy, which adds unsprung weight that the suspension must control.
After mounting, drive the vehicle slowly through a full lock sweep and a bump course, then check for rub marks on the tire and the back of the rim. Look at the lug seats and bolt holes after the first off-road use, and keep the flat black finish touched up with matching paint if chips appear, since bare steel can rust in mud and standing water.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW97-5185F |
| Series | 97 Series Rock Crawler |
| Construction | Steel |
| Style | Holes |
| Finish | Flat black powder coat (the spec sheet says black) |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -44 |
| Backspacing | 3.75 |
Vehicle fitment
No vehicle is named with years or a chassis code for this wheel. A -44 offset is a large outward shift, so the fender, the steering knuckle and the brake caliper must all be checked before this wheel is used on any vehicle. Compare the 5 on 5.5 pattern and 108 center bore with the hub, since those define the mounting fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit with the tire you plan to run before a trail trip, because a -44 offset can change how the tire clears the frame, steering and suspension parts. Check the lug nut seat type, and avoid mounting the wheel with a bent or damaged hub face.
What’s included
The package is the 15×10 wheel alone (PCW97-5185F), with no center cap included.
Not included: Center cap and lug nuts for part PCW97-5185F, which are sold separately.











