Overview
The Pro Comp 97 Series Rock Crawler in 15×8 inches is a gloss black steel wheel, part number PCW97-5884, drilled for a 6 on 5.5 bolt pattern. Pro Comp Steel Wheels builds it in the Rock Crawler Series 97 for trucks and SUVs that need a steel wheel with a holes-style face and a powder coated finish.
Unlike the negative-offset wheels in this line, this one has a 0 offset, which places the mounting face right on the centerline of the rim. The 4.5 backspacing measures the room behind the mounting face, and the 108 center bore centers the wheel on the hub.
Key features
- Steel construction with a gloss black powder coat
- 15 inch diameter and 8 inch width
- 6 on 5.5 bolt pattern
- 108 center bore
- 0 offset and 4.5 backspacing
- Holes-style face in the Rock Crawler design
Zero offset and clearance
A zero-offset wheel places its mounting face on the centerline, so the tire sits roughly centered under the fender compared with a wheel that is pushed outward. That makes it a practical choice for a build that needs steel strength without pushing the tire far outward. Its 4.5 backspacing still leaves the rear of the rim close to the brake parts, so the fit should be checked.
Choosing a wheel for this type of setup involves tire size, the backspacing and the suspension travel. A taller tire increases rolling diameter and changes gearing, while a heavier tire adds weight the wheel, hub and steering parts must carry. Many owners also check the lug seat type and the hub bore so the wheel seats correctly before the first drive.
Steel wheels with a powder coat need regular looking-over. Check the lip and the area around each bolt hole after trail use, since a crack or bend is a reason to retire the wheel rather than repair it. Touch up chips promptly with a matching coating, and wash mud off the face so that corrosion does not start under the finish.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW97-5884 |
| Series | 97 Series Rock Crawler |
| Construction | Steel |
| Style | Holes |
| Finish | Gloss black powder coat (the spec sheet says black) |
| Diameter | 15 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.5 |
Vehicle fitment
This 8 inch steel wheel is not tied to a named year, make, model or chassis code. Its 6 on 5.5 bolt pattern and 108 center bore are the hub figures to match, and the 0 offset and 4.5 backspacing should be compared with the clearance your vehicle needs. Pro Comp’s universal label does not confirm that the wheel fits any particular truck.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A zero-offset wheel sits farther out than a positive-offset wheel of the same width, so check tire clearance at the fender and brake caliper. Inspect the powder coat for chips before mounting and touch up exposed steel to limit corrosion.
What’s included
The package covers the 15×8 wheel only (PCW97-5884); no center cap is part of it.
Not included: Center cap and lug nuts for part PCW97-5884, which are sold separately.











