Overview
The Pro Comp Series 51 wheel in 16×8 inches is a flat black steel wheel, part number PCW51-6873F, with a 5 on 5 bolt pattern. It is a Series 51 design for off-road builds, with a heavier steel construction than a typical stamped wheel.
The Xtreme steel construction uses thicker welds and close tolerances for four-wheel-drive use. The finish is a powder coat, and the wheel is made in the USA. Center caps are not included with steel wheels and are sold as separate parts.
Key features
- Steel wheel with a flat black powder coat
- 16 inch diameter and 8 inch width
- 5 on 5 bolt pattern.
- Thicker welds and close tolerances.
- Made in the USA
Caps, lugs and clearance
Steel wheels like this one carry their weight well on rough ground, and the powder coat protects the surface from road grit. The steel gives a predictable base when the rim takes a hard hit on a trail. The tradeoff is weight, which adds to unsprung mass, so tire choice and the suspension setup both matter for ride and steering feel. A heavier tire on a steel rim can make the wheel feel slower to respond on pavement.
Before buying a set, sort out the cap and lug situation so the wheels can be mounted in one visit. Check the lug nut seat type against the hub studs, and keep a torque wrench handy for the first few drives. Look at the powder coat around the lug seats and the valve hole at each tire rotation. Chips there are the usual starting point for rust on steel wheels, so touch them up when they appear.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-6873F |
| Series | 51 Series |
| Construction | Steel |
| Finish | Flat black powder coat |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5 |
| Origin | Made in the USA |
Vehicle fitment
No model year, make or chassis code applies to this steel wheel. Match the 5 on 5 bolt pattern to the hub first, and measure the vehicle’s clearance before choosing this size. A universal fit label does not confirm that the wheel suits a particular truck.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Center cap options 5451K and 5553K are sold separately for two vehicle families. Buy caps and lug nuts before mounting, and check the lug nut seat against the wheel.
What’s included
The 16×8 wheel (PCW51-6873F) is sold alone, without a center cap.
Not included: Center cap and lug nuts for part PCW51-6873F, which are sold separately.









