Overview
The Pro Comp 97 Series Rock Crawler 97-5185 is a 15×10 steel wheel with a 5 on 5.5 bolt pattern in Gloss Black.
The 97-5185 has a 108 center bore, -12 offset and 4 backspacing, with a holes style and powder coat finish. The Series 97 Black Monster Mod wheels are steel wheels built on modern production equipment. The center cap and lug nuts are sold separately. The catalog number is PCW97-5185.
The Pro Comp 97 Series Rock Crawler is a steel wheel with a holes style and powder coat finish. It is built with quality materials on modern production equipment.
The wheel is 15 inches in diameter and 10 inches wide. The negative offset of -12 and 4 backspacing place it relative to the hub. The center cap and lug nuts are sold separately. The catalog number is PCW97-5185.
Key features
- 97 Series Rock Crawler steel wheel, 15×10
- 5 on 5.5 bolt pattern
- Powder coat finish, Gloss Black
- Holes style
- 108 center bore
- -12 offset and 4 backspacing
Steel wheels for rock crawling
Steel wheels are heavier than aluminum, but they resist bending when a rock strike lands square on the rim. On technical trails that matters for keeping the bead and tire seated and the wheel round. Powder coat finishes protect the steel from surface rust, though chips at the rim edge can start corrosion if left alone.
Fit planning matters as much as strength. Check offset and backspacing against the hub, and confirm clearance at the brakes and springs with the tires you plan to run. Steel wheels are often paired with wider or taller tires, which can rub on fenders and frame. Recheck tire clearance after any suspension change.
- Inspect rim edges for dents after trail use
- Touch up powder coat chips promptly
- Recheck clearance after suspension changes
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | 97-5185 |
| Catalog number | PCW97-5185 |
| Series | 97 Series Rock Crawler |
| Wheel diameter | 15 Inches |
| Wheel width | 10 Inches |
| Bolt pattern | 5 on 5.5 |
| Offset | -12 |
| Center bore | 108 |
| Backspacing | 4 |
| Style | Holes |
| Construction | Steel |
| Finish | Gloss Black, powder coat |
| Fit type | Universal fit |
Vehicle fitment
Information for the Pro Comp 97-5185 labels the Pro Comp 97-5185 a universal fit but names no vehicle, year or chassis code. Match the 5 on 5.5 bolt pattern and check the offset of -12, the center bore and the clearance on your vehicle.
Wheel fitment depends on bolt pattern, offset, center bore and brake clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A steel wheel like this one still needs a fit check: bolt pattern, center bore, offset and backspacing against your hubs, and clearance behind the wheel. Lug nuts and a center cap are bought separately, so tighten the nuts in a star order and check them again after a first drive.
What’s included
The package is the wheel only.
Not included: Center cap and lug nuts are sold separately.











