Overview
The Pro Comp Series 252 Street Lock in 16×8 inches is a gloss black windowed steel wheel, part number PCW252-6866, with a 5 on 4.5 bolt pattern. It is a 16 inch member of Pro Comp Steel Wheels’ Series 252 line, which the brand sizes for off-road vehicles that need a durable steel wheel with a powder coat.
The wheel has a -6 offset and a 4.25 backspacing. The -6 offset places the mounting face slightly behind the centerline, and the backspacing is the distance from that face to the back edge of the rim. The 83 center bore is the hub opening that centers the wheel.
Key features
- Windowed steel design with a gloss black powder coat
- 16 inch diameter and 8 inch width
- 5 on 4.5 bolt pattern
- 83 center bore
- -6 offset and 4.25 backspacing
- Series 252 Street Lock styling
Steel wheel care and use
Steel wheels handle rough use well and cost less to replace after impact than aluminum, which makes them a common choice on trail rigs. The windowed design lets air move past the brake parts and helps with cooling, though it also gives mud and rocks more places to lodge. Clean the inside of the wheel after off-road runs to slow corrosion at the welds.
Powder coat finishes need gentle care. Use a soft brush with mild soap, and skip high-pressure spray aimed at the lug seats. Touch up chips promptly so bare steel does not rust. Check the welds and bolt holes at each tire rotation, and replace a wheel with cracks, bends or heavy rust.
- Keep lug seats clean before mounting
- Re-torque lug nuts after the first few drives
- Rotate tires on a regular schedule
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW252-6866 |
| Series | 252 Series Street Lock |
| Construction | Steel |
| Style | Windowed |
| Finish | Gloss black powder coat (the spec sheet says black) |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.25 |
Vehicle fitment
Vehicle fit depends on the hub match and clearance, not on the wheel alone. The 5 on 4.5 pattern with an 83 center bore is the hub match to confirm, and the -6 offset with the 4.25 backspacing should be checked against the fender and brake clearance of the truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the wheel’s lug seats and bolt holes are clean and undamaged before mounting. A light powder coat can scratch during fitting, so keep the rim face covered while it is being set on the hub.
What’s included
The 16×8 windowed wheel is sold as part PCW252-6866, with the center cap and lug nuts sold separately.
Not included: Center cap and lug nuts for part PCW252-6866, which are sold separately.









