Overview
The Pro Comp 51 Series Rock Crawler 15×8 wheel, part number PCW51-5883, is a 15-inch steel wheel that is 8 inches wide. It uses a 6 on 5.5 bolt pattern and a gloss black finish with a windowed design.
The wheel has a 108 center bore, a -38 offset and a backspacing of 3.75. The Rock Crawler comes in several sizes and backspacings, and the steel body carries a durable black coating. It is universal fit and is not assigned to a make, model or year.
Key features
- Steel construction
- 15-inch diameter, 8-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset -38 with backspacing 3.75
- Gloss black windowed style
Full-lock and tire coverage
Full-lock clearance is the test that matters most on a deep negative offset. A wheel can clear the fender when the steering is straight and then contact the frame, a control arm or the inner liner when the wheels turn. Test both directions with the vehicle loaded, and check at the top and bottom of suspension travel, since a lifted or sagging setup changes clearance more than most people expect.
Gloss black finishes hide small scratches well but show wear at the rim edge first. A bead lip scuffed by rock contact can let a tire leak slowly, so inspect the edge after trail use. Keep a spare tire inflated and check lug torque after the first drives, since hard vibration can loosen nuts on a new mounting.
- Check clearance at full lock in both directions
- Test at full suspension compression and droop
- Inspect bead lips after rock contact
- Retorque lug nuts after the first drives
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5883 |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -38 |
| Backspacing | 3.75 |
| Style | Windowed |
| Finish | Gloss black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
This steel wheel is universal fit and not assigned to a make, model or year. Match the 6 on 5.5 hub and 108 center bore, then check the -38 offset against the brake caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the offset is deeply negative, check outer clearance at full steering lock as well as on the straight-ahead position.
Gloss black steel suits rough terrain use. The 6 on 5.5 pattern and 108 center bore must match the hub, and the -38 offset requires careful fender and suspension clearance checks.
What’s included
Not included: center cap and lug nuts, which are sold separately.









