Overview
The Pro Comp 89 Series Kore in a polished finish is a 17×8 inch cast aluminum spoke wheel with part number PXA1089-7883. It uses a 6 on 5.5 bolt pattern and is one of the polished options in Pro Comp Alloy Wheels’ 89 Series, a line aimed at trucks and SUVs that need a wheel with clearance for the brake assembly.
The wheel is listed with a 0 offset and 4.5 backspacing. Offset sets where the mounting face sits relative to the centerline, and backspacing measures the distance from the mounting face to the back edge of the wheel. Its 108 center bore centers the wheel on the hub, so confirm the hub diameter before you order.
Key features
- Polished finish on a cast aluminum wheel
- Spoke design in a 17 inch by 8 inch size
- 6 on 5.5 bolt pattern
- 108 center bore
- 0 offset and 4.5 backspacing
- Series 89 Kore styling from Pro Comp Alloy Wheels
Caring for a polished finish
Polished aluminum shows scratches and water spots more readily than painted or satin finishes. Wash the wheel with a mild, non-acidic cleaner and a soft brush, then rinse thoroughly to remove brake dust before it bonds to the surface. Clean the wheel when it is cool so cleaner does not dry on the face. Hard water can leave mineral marks, so dry the wheel after washing.
A protective wax or sealant helps keep the polished face bright and makes brake dust easier to remove. Avoid steel wool and abrasive pads, which can leave haze that is difficult to reverse. Inspect the spokes and barrel after road debris strikes, since a bent or cracked wheel should be replaced rather than repaired.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1089-7883 |
| Series | 89 Series Kore |
| Construction | Aluminum |
| Style | Spoke |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.5 |
Vehicle fitment
This wheel is not tied to a named vehicle, and no years or chassis codes are listed. The 6 on 5.5 bolt pattern and 108 center bore are the hub specifications to match, and the 0 offset decides how far the wheel sits from the hub face. Polished finish does not change fitment, so use the same hub and clearance checks you would use for the black version.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Polished aluminum scratches more easily than painted finishes, so use a wheel-safe mounting tool and avoid metal-on-metal contact with the rim face during installation. Make sure the hub bore is not larger than the wheel’s 108 center bore without a hub adapter.
What’s included
This is the 17×8 wheel alone (PXA1089-7883). Confirm any center cap or lug nuts you need before the wheel goes on the hub.











