Overview
The Pro Comp 60 Series Hammer 17×9 wheel, part number 5160-7983, is a 17 inch by 9 inch satin black aluminum wheel with a windowed style and a 6 on 5.5 bolt pattern. It is a universal fit, so no year, make or model is attached to it.
The wheel is made with low-pressure casting and has a satin black finish.
Load ratings for this alloy line run from 2500 to 3650 lbs per wheel. The warranty transfers to a new owner.
Key features
- Aluminum construction made by low-pressure casting
- Windowed style in satin black
- 17 inch diameter and 9 inch width
- 6 on 5.5 bolt pattern with a 108 center bore
- Offset -6 and backspacing 4.75
- Load rating of 2500 to 3650 lbs per wheel.
- Warranty described by Pro Comp as transferable
Choosing offset and fit
Offset and backspacing decide where the tire sits in the wheel well and how much room is left for the brake caliper and the suspension. A wheel that looks right on the hub can still rub if the offset moves the tire outward or the backspacing leaves too little space behind the mounting face. Measure the clearance with the tire you plan to run, since tire width and sidewall height change the fit.
Hub fit comes first. The bolt pattern must match the hub exactly, and the center bore should center the wheel on the hub rather than relying only on the lug nuts. Load ratings matter as well, so the wheel should be matched to the load the vehicle and tires will carry.
- Confirm the lug seat type matches the lug nuts
- Check tire width against the wheel width
- Look for a hub-centric ring when the center bore is larger than the hub pilot
- Re-torque lug nuts after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 5160-7983 |
| Series | 60 Series Hammer |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Satin black |
| Construction | Aluminum |
| Load rating | 2500 to 3650 lbs per wheel |
Vehicle fitment
This wheel is a universal fit with no vehicle attached. Check the bolt pattern, center bore and offset against your hub and wheel well before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 6 on 5.5 bolt pattern and the 108 center bore against your hub before mounting. A -6 offset places the mounting face further outward than a positive-offset wheel, and the 4.75 backspacing also changes clearance to brake and suspension parts. Confirm tire and fender clearance with the tire you plan to run.
What’s included
One wheel. Not included: the tire.











