Select your vehicle
-13%

Pro Comp 3″ Lift Kit with PRO-X Shocks – K2051T

Pro Comp Suspension

Shop Dodge Ram 1500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1994 to 2001 Dodge Ram 1500 pickups
  • 3-inch stage 1 lift
  • PRO-X front and rear shocks included
  • Block and spacer rear lift with U-bolts

Description

Overview

The Pro Comp 3-inch Lift Kit with PRO-X Shocks, part number EXPK2051T (kit K2051T), is a stage 1 suspension lift for 1994 to 2001 Dodge Ram 1500 pickups. It fits the Ram 1500 across the Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport and WS versions.

The kit is a 3-inch stage 1 lift with a listed lift height range of 0 to 3.5 inches. The rear uses a block or spacer, with a block and U-bolt component. PRO-X shocks are listed at the front and the rear and are included.

Key features

  • 3-inch stage 1 suspension lift
  • PRO-X shocks at the front and rear, included
  • Block or spacer rear lift with a block and U-bolt component
  • Lift height range of 0 to 3.5 inches

Driveline and rear geometry

A block and U-bolt rear lift raises the axle by spacing the springs, which changes how the driveshaft meets the transfer case and the pinion. Changed angles can cause vibration, wear on the U-joints and noise from the differential. Measuring the angles after installation lets you spot a problem before it grows.

The rear springs carry more of the load when the body is raised, so the spring pads, shackles and bushings see more movement. Check them when the truck is up on stands. Shocks matched to the lift keep the axle from bouncing under acceleration, and a tight rear end makes steering feel more predictable on the road.

  • Check U-joint wear after the first long drive
  • Look for rubbing on the brake lines at full droop

Specifications

Brand Pro Comp Suspension
Part number EXPK2051T
Kit code K2051T
Suspension type Lift kit, stage 1
Lift height 3 inches stage 1; range 0 to 3.5 inches
Rear lift method Block or spacer
Rear lift component Block and U-bolt
Shocks included Yes
Front shocks PRO-X
Rear shocks PRO-X
Fit type Direct fit

Vehicle fitment

The kit fits the 1994 to 2001 Dodge Ram 1500, including the Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport and WS versions.

The list does not include the Ram 2500 or Ram 3500, or 2002 and newer Ram 1500 trucks. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The block and U-bolt rear setup raises the rear by spacing the springs, so the rear height and the driveline angle change. Check both after the kit is in.

What’s included

The 3-inch stage 1 lift kit with PRO-X front and rear shocks.

SKU: EXPK2051T Categories: ,

Fitment

VehicleYearsTrims
Dodge Ram 15001994–2001Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport, WS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp K2051T fit a 1999 Dodge Ram 1500?

Yes. The kit fits 1994 to 2001 Dodge Ram 1500 pickups, and 1999 falls within that range. Confirm the trim before ordering.

Does it use the same shocks as the PRO-M version?

No. This kit lists PRO-X shocks at the front and rear. The K2051M kit lists PRO-M shocks, and the rear lift method differs.

What lift height does the kit give?

The kit is a 3-inch stage 1 lift, with a listed lift height range of 0 to 3.5 inches. The back of the truck is raised with a block or spacer and a block and U-bolt component.

Do the rear springs need attention after a block lift?

Yes. Check the U-bolts for tightness after the first few drives, and inspect the spring pads and shackles for wear. Worn bushings can let the axle shift, so look at them whenever the rear feels loose.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 1500 Lift Kits on Amazon