Overview
The Pro Comp K1088M is a 6 inch stage 1 lift kit with PRO-M shocks for the 2011-2018 Chevrolet Silverado 3500 HD and GMC Sierra 3500 HD. The part is also numbered EXPK1088M.
This Pro Comp lift kit raises the vehicle with a lift height range of 6-7 inches. The rear lift uses a block and u-bolt (a block or spacer method), and the kit includes PRO-M shocks for both the front and the rear.
Key features
- 6 inch stage 1 lift kit with a lift height range of 6-7 inches
- PRO-M shocks included, front and rear
- Rear lift method: block and spacer, with a block and u-bolt
- Complete suspension system and lift kit
- Direct fit for the listed Silverado and Sierra HD models
Care for the rear block lift
A block and u-bolt rear lift sets the axle on a block and secures it with u-bolts, so the rear geometry is changed in several places at once. Pinion angle, driveshaft length and shock mounting all depend on the installed height. Checking these after installation helps the rear drive smoothly over bumps and under braking.
Routine checks matter more after a lift. Look for loose u-bolt nuts, shifts in the block, and wear at the bushings or shock eyes. Brake hoses and wiring can also tighten up at full droop, so inspect them whenever the suspension is serviced. Keep a simple log of installed parts and service dates.
- Re-check u-bolt nut torque after the first drives
- Watch for vibration that changes with speed
- Inspect shock eyes and bushings during oil changes
- Confirm headlight aim after any ride height change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1088M |
| Product type | Complete suspension system and lift kit |
| Manufacturer part number | EXPK1088M |
| Lift kit | 6 inches stage 1 |
| Lift height range | 6-7 inches |
| Shocks series | PRO-M |
| Front shocks | PRO-M shocks |
| Rear shocks | PRO-M |
| Shocks included | Yes |
| Rear lift method | Block/spacer |
| Rear lift component | Block and u-bolt |
| Fitment type | Direct fit |
Vehicle fitment
Listed fitment: 2011-2018 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT) and 2011-2018 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT).
The list covers only the 3500 HD models, so it does not cover the Silverado and Sierra 1500 or 2500 models, or model years before 2011. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is recommended. Tighten every fastener to the torque values the kit calls for, using the hardware supplied with it. Re-check fasteners after the first miles of driving and have the alignment checked after any suspension work. Confirm brake line, driveshaft and tire clearance after installation, and check local regulations on lift height. Ride height changes can also affect headlight aim, so check it afterward and keep a record of installed parts.
What’s included
A 6 inch stage 1 lift kit with PRO-M front and rear shocks and a rear block and u-bolt. Check the package contents against your installation before starting.
Not included: Alignment service and any additional parts the installation requires beyond the kit contents.















