Overview
The Pro Comp K4144B is a 6-inch Stage 1 lift kit with ES9000 shocks for the 2009–2014 Ford F-150. Front crossmembers and steering knuckles set the front height, impact struts and a rear crossmember complete the front structure, and a rear block and U-bolt kit lifts the back.
Front shocks are re-used OEM units. Confirm the shock package before ordering if ES9000 shocks are expected. No steering correction is needed, and brake line extension brackets are included for the raised front brake lines.
Key features
- 6-inch lift height
- Front crossmembers and steering knuckles
- Impact struts
- Front sway bar spacers
- Rear crossmember and brake line extension brackets
- Rear block and U-bolt kit
Rear lift and brake lines
A block and U-bolt rear lift raises the axle on the existing springs, so the rear sits higher without changing the spring rate. That height change alters the pinion angle, and vibration after the install is often the first sign to check it. U-bolt nuts should be snugged after the first drives, then checked again at each service.
Brake hoses at the front and rear carry more travel once the body rides higher. Look for hoses that rub on the tire, spring or frame, and replace any that show cracks or bulges. Extension brackets help hoses reach the raised components, but they still need a visual check after installation.
Pairing the rear block with a front crossmember lift means the whole truck should be aligned and the driveline checked together. Front sway bar spacers and impact struts should also get a look at the same visit, since they carry load on the raised geometry. Keep a record of what was changed so future repairs are simpler.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4144B |
| UPC | 614901206616 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmembers, steering knuckles and impact struts |
| Steering correction | None required |
| Rear lift | Block and U-bolt kit |
| Front shocks | Re-use OEM (the product name cites ES9000 shocks) |
Vehicle fitment
This kit fits the 2009–2014 Ford F-150, in the FX2, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT versions.
The list runs from the 2009 through 2014 model years, so earlier F-150 trucks and the 2015 and newer generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front geometry changes with the crossmembers and knuckles, so have the alignment and driveline angles checked after the lift is installed.
What’s included
The kit includes front crossmembers, steering knuckles, impact struts, front sway bar spacers, a rear crossmember, brake line extension brackets, and the rear block and U-bolt kit.









