Overview
The Pro Comp 6 Inch Lift Kit with ES9000 Shocks, part number K1085B, is a crossmember and knuckle lift system for 2011-2018 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD trucks. It also fits the 2018 GMC Sierra 3500 HD. The front lifts 6 inches and the rear lifts 3.5 inches, with lift blocks and U-bolts at the rear.
The front uses a heavy-duty crossmember and steering knuckles made from laser-cut, quarter-inch thick stock. The kit clears 35-inch tires with no trimming. The install is bolt-on and needs no welding, drilling or cutting of the differential.
Key features
- 6-inch front lift with a crossmember and knuckle system
- 3.5-inch rear lift with lift blocks and U-bolts
- Clearance for 35-inch tires with no trimming
- Heavy-duty, laser-cut crossmember and steering knuckles
- Driveline spacers, bump stop extensions and skid plate included
- No steering correction
Crossmember lifts and driveline
A crossmember and knuckle system sets the front geometry on heavy-duty trucks, so it works as a complete front end rather than a single part. Because the factory components are replaced, the new geometry depends on correct installation and a full alignment afterward. Heavy-duty trucks carry more load, so the front and rear geometry should be balanced.
Driveline spacers and bump stop extensions help control the change in driveline angles and suspension travel. The skid plate protects the underside, but it does not replace a check of the front brake lines and steering components. Look for wear at the tie rod ends and ball joints during regular service.
- Check driveline angles after the first trail runs
- Inspect bump stop extensions for cracks
- Keep skid plate bolts snug and check them regularly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1085B |
| UPC | 70000554025 |
| Lift height | 6 inches front, 3.5 inches rear |
| Lift height range | 5 to 6.99 inches |
| Front lift | Crossmembers and 4WD steering knuckles |
| Steering correction | None |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | ES9000 |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2011-2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ and WT), the 2011-2018 GMC Sierra 2500 HD (Base, Denali, SLE, SLT and WT) and the 2018 GMC Sierra 3500 HD (Base, Denali, SLE and SLT).
Earlier 2500 HD years and 1500-series trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The crossmember and knuckle design replaces the factory front components, so have the alignment and driveline angles checked after installation. The install needs no welding or drilling.
What’s included
The kit includes the front crossmembers and steering knuckles, rear lift blocks with U-bolts, driveline spacers, bump stop extensions, a skid plate and ES9000 front shocks.




























